Hi-Flo JH40011 Submersible Pump with Internal Float Switch - 400 Watt
The Hi-Flo JH40011 pump is suited to all de-watering tasks including pumping out sumps, swimming pools, flooded areas and drawing water from wells.
This pump has an internal float switch which will not foul and allows for installation in small sumps (min size 260mm x 160mm x 330mm deep).
It has a switch which allows you to select Automatic or Manual mode. When switched to Automatic mode the pump will start when water level reaches 150mm and turn off when water level drops to 70mm. When switched to manual mode, the pump will run continuously until power to the pump is turned off. In this mode the scavenger type base allows pumping down to 5mm. Specifications:
Power: 400 Watt
230v. Single Phase
Max Flow rate: 115 Litres per minute
Max Delivery height: 8 metres
Max Immersion depth: 7 metres
Flow at 2 metres 110 lpm
Flow at 4 metres 75 lpm
Flow at 6 metres 45 lpm
Foreign body size up to 5mm
Comes with Non Return Flap Valve
Liquid Temperature: 0-40 Degrees Features:
Light weight
Easy to use
Can pump solids up to 5mm in diameter
Internal Float switch for run-dry protection
10 Metre electrical cord with std. 3 pin Plug
1" & 1ΒΌ stepped outlet hose fitting - 25mm & 32mm Hose
Can pump down to 5mm from bottom of sump on manual mode. Applications:
Drainage pump
Clean Water applications
Pool & Spa
Water Transfer
Not suitable for ponds, fountains, sewage/effluent or biotreatment systems
Suitable for intermittent use only. No t recommended for permanent installation
12 months warranty
JH40011 Brochure