Reef Synergy 5 views   2 clicks Claim this Business♡

ABYZZ A400 18,000 LPH COMMERCIAL GRADE DC PUMPThese pumps only contain the highest quality parts to make an incredibly reliable, efficient controllable DC water pump. Featuring laser welded atitanium encased Neodymium rotor, powerful and programmable menu-controlled electronic driver, and a sinusoid...

Abyzz Volute CoversReplacement Abyzz pump volute cover.

Abyzz O-Ring Kit A200/A400The Abyzz O-ring set A200 consists of four ring-shaped sealing elements that may be required for a revision.We recommend replacing the O-rings after approx—5 descaling cycles to continue to ensure trouble-free operation.

Impeller Wheel Replacement for Abyzz Pumps- Abyzz A200 & A400

Replacement front and rear bushing and o-ring for Abyzz A200 and A400 pumps.

Output/Input Adapters for Abyzz PumpsAvailable Options:- A100/A120 Volute Adapter (40mm IN - 25mm OUT)

SPECIAL ORDER ITEMThis is a special order item. Please for more information or if you wish to order this item.

Available Options:- A200/A400 Volute Adapter (50mm IN - 40mm OUT)

Replacement Radial Bearing, 6mm, for the Abyzz A100/A120/AFC150 pump.

Abyzz offers two magnetic holders for mounting the Abyzz AFC150 Flow Pump on aquarium glass. The two sizes include:- Magnet with a thickness of up to 0.6in (15mm)- Magnet thickness is 0.6-1.0in (15 – 25mm)Magnetic Holder Includes:- Magnetic disk with rubber protectors for mounting on the back of t...

The Pipe Clamp Mounting Hardware for Abyzz AFC150 Flow Pump fits a round tube with a diameter of 1 1/4in (40mm).Hardware Includes:- The clamp is made of high-quality black PVC- Titanium clamping screw with nut- Three titanium screws M6Specifications:- Weight - 1.43lb (0.65 KG)- Dimensions - 8.66 x 6...

Abyzz offers two magnetic holders for mounting the Abyzz AFC150 Flow Pump on aquarium glass. The two sizes include:- Magnet with a thickness of up to 0.6in (15mm)- Magnet thickness is 0.6-1.0in (15 – 25mm)Magnetic Holder Includes:- Magnetic disk with rubber protectors for mounting on the back of t...

Output/Input Adapters for Abyzz PumpsAvailable Options:- A100 Volute Adapter (40mm IN - 25mm OUT)

MAX FLOW – 14,000 LPH - MAX HEAD – 9.5 METRESThese pumps only contain the highest quality parts to make an incredibly reliable, efficient controllable DC water pump. Featuring laser welded atitanium encased Neodymium rotor, powerful and programmable menu-controlled electronic driver, and a sinus...

Abyzz 3rd-Party 0-10V Controller InterfaceConnecting the Abyzz to Neptunes Apex Interface is very simple. All that is required is an open variable speed port on an Apex System or expansion module. The RJ45 connector will plug directly into the variable speed port on the APEX system, and then the ser...

Abyzz Flow Cannon AFC150 Commercial Flow PumpThe innovative Abyzz Flow Cannon AFC150 with its high-end design, including a titanium rotor unit, titanium mounting frame, and carbon fiber parts, consists of the pump itself and a powerful and programmable driver. With an efficiency rating of more than...

Keep your GHL KH Director running with reagent refills. It is important to maintain your reagent bottle to ensure that air does not get sucked up into the dosing lines during a test. We like to always keep a second bottle of reagent on-hand and refill the original bottle that is connected to the 2.1...

The Float Switch Level Sensor from designed for use with GHL Profilux aquarium controllers and the Doser 2.1 SA dosing pumps to provide constant water level monitoring for control of related aquarium equipment. This float switch can be used to trigger top off pumps or turn off equipment in an emerge...

The GHL PL-LF-S8 Level Sensor Fastener work with the Level Sensor Holder Base Unit to securely mount your float switch sensor to the desired height in your aquarium or sump. The fastener has an 8mm slot to accommodate the float switch, and securely mounts to the plexiglass bar of the mounting base a...

The ProfiLux Splitter cable allows the Mini-DIN port to be split to accept 2 level or leakage sensors. This splitter is useful for connecting sensors such as the float switch to Mini-DIN port on the Profilux controller and Doser 2.1 dosing pump.- Allows 2 sensors on a single port- Facilitates ATO fu...

Magnetic attachment, suitable up to 15 mm glass thickness, for a sensor with 12 mm shaft diameter, made of transparent acrylic glass.

Holder for 4 sensors, magnetic fixing, max. glass size 12 mm. Magnetic attachment, suitable up to 15 mm glass thickness, for four sensors, each with 12 mm shaft diameter, made of transparent acrylic glass.

For all ProfiLux and Expansion Box (all versions each)with 2x RJ12 cable 1m and cable ties.

GHL calibration fluids come in a handy 50 mL bottle, making regular probe calibration fast and easy. All GHL measurement electrodes are made of the highest laboratory grade materials. To ensure consistent performance and accuracy, pH probes should be calibrated regularly; we recommend re-calibration...