SE62 Reinforcing Mesh (6.05m x 2.42m)
SE62 reinforcing mesh is suited for engineered applications such as suspended floors or engineered slabs where a specific minimum strength needs to be achieved. SE62 seismic mesh is usually specified by engineers during the design stage of projects. SE62 seismic mesh has been engineered to meet the shaky conditions of the New Zealand landscape. All SE62 mesh sheets have full traceability and can be used with confidence.
Unsure of which reinforcing steel mesh to buy? Read our guide about the Different Types of Reinforcing Steel Mesh in New Zealand (article will open in a new window). Technical Specifications of SE62 Mesh
- SE62 Mesh dimensions: 6.05m x 2.42m
- Gross sheet area: 14.64 m2
- Net cover (with 200mm lapping): Approx. 12.36m2
- Mass per sheet: Approx. 36kg
- Wire Centres: 200mm
- Wire: 6.1mm smooth / plain
- Yield Stress: >= 500MPa
200mm is generally considered to be the recommended lapping for SE62 mesh, however please consult your engineer if a specific overlap splice is required. What is SE62 Mesh?
- “S" stands for square (shape of the grids)
- “E" stands for earthquake (seismic grade)
- “6" stands for wire diameter in mm
- “2" stands for centres between wires (200mm)
SE62 seismic certified Grade 500E reinforcing mesh is manufactured in accordance with NZS4671:2019 Ductility Class E and NZS3604:2011 standards (NZ compliant). Applications of SE62 Grade 500E Seismic Mesh
Seismic grade 500E reinforcing mesh is designed for high-strength performance in earthquake-prone areas, meeting strict engineering requirements for ductility and load resistance. It helps concrete structures flex under seismic forces without catastrophic failure. Installed per engineering plans, the SE62 mesh is supported on chairs or spacers to position it correctly within the slab or wall’s depth. Concrete is poured to fully encase the steel, ensuring maximum bond and strength, with overlaps and ties secured to maintain structural integrity during seismic events. Projects & Tenders
If your enquiry relates to a project and you'd like us to quote on cut & bent reinforcing or a combination of bar, mesh and / or , please head over to our Projects & Tenders page. Experience the SaveBuild Difference Today!
We can deliver reinforcing products to most job sites or business addresses in New Zealand. Check out our full range of reinforcing products today for reinforcing bar, mesh, bar chairs, tie wire, safety caps, polythene sheets and a range of small rebar tools.