Pet Enclosure Gate Panel (2.4m W x 1.95m H)

The Pet Enclosure Gate Panel gives you a full-width access point built directly into your temporary fence run. At 2.4m wide and 1.95m tall, it combines a large fixed mesh panel with a narrower built-in swing gate, so you can walk in and out of your enclosure without dismantling anything. Built-In Swing Gate

The gate is hinged on the one side and latches securely on the other side, giving you an entry point that stays closed on its own. A gate latch can be supplied as an optional extra. Quick to Set Up, Easy to Move

The fence panels connect using couplers and are held upright by driving waratahs (available at our website) into the ground alongside each panel. No concrete, no tools, no specialist knowledge needed. You can have a full enclosure up in minutes and pack it down just as fast - saving time on every job. Built to Last Outdoors

The frame is made from 32mm O.D. x 2.0mm wall thickness pipe with a pre-galvanised finish averaging 42 microns. The robust construction and thick level of galv. coating means the steel holds up incredible well against moisture and weather for many, many years. Welded Wire Infill

The infill mesh uses 4mm horizontal and 4mm vertical wire at 150mm x 60mm spacing. The tighter vertical spacing helps contain smaller animals while still allowing airflow and visibility through the panel. Panel Specifications

- Size: 2400mm (L) x 1950mm (H)
- Frame: 32mm O.D., 2.0mm wall thickness
- Finish: Pre-Galvanised, 42 microns average
- Infill: 4mm wire, 150mm x 60mm spacing
- Weight: 30kg per panel
- Gate: Built-in swing gate with integrated hinge and latch
- Installation: Couplers waratah stakes