ENGINE BLUEPRINT CHEV 350 FULLY DRESSED INCL ACCESSORY DRIVE KIT 341HP

Brand: BluePrint Engines Manufacturer's Part Number: BP350CTCK Part Type: Crate Engines Crate Engine Family: Chevy Small Block Actual Engine Displacement: 5.7L/350 Crate Engine Cylinder Head Material: Aluminum Engine Block Material: Cast iron Advertised Compression Ratio: 9.0:1 Assembled: Yes Engine Balance: Internal/External Cam Style: Hydraulic roller, OE roller Rear Main Seal Style: 1-piece Intake Manifold Included: Yes Intake Manifold Style: Carbureted Cylinder Heads Included: Yes Carburetor Included: Yes Distributor Included: Yes Oil Pan Included: Yes Valve Covers Included: Yes Timing Cover Included: Yes Water Pump Included: Yes Harmonic Balancer Included: Yes Flexplate Included: No Flywheel Included: No Air Cleaner Included: Yes Spark Plugs Included: Yes Spark Plug Wires Included: Yes Water Pump Style: Long Remanufactured: No Notes: Ready to drop in and includes fuel pump, 600 cfm carburetor, HEI distributor, and front accessory drive with air conditioning compressor, alternator, and power steering pump. Will not clear stock Corvette hood. Passenger side dipstick. Block is drilled and tapped for clutch linkage.

BluePrint Engines 350 C.I.D. Cruiser Fully Dressed Crate Engines

BluePrint Engines 350 c.i.d. Cruiser fully dressed crate engines make an great choice for daily drivers and cruising. These fully dressed engines make up to 18 in. of vacuum and work excellent with power brakes, stock torque converter and stock gearing and they will run on 87 octane fuel.
Details and specs:
341 hp/371 lbs.-ft.
Compression Ratio: 9.2:1
Aluminum heads
Hydraulic roller cam
Cast iron crankshaft
Hypereutectic pistons
Block:
New BluePrint cast iron block
4-bolt main
4.000 in. bore
One-piece rear main seal
Mechanical fuel pump provision
Passenger side dipstick
Drilled and tapped for clutch linkage
Rotating Assembly:
Cast iron crankshaft
3.480 in. stroke
Forged 5.700 in. connecting rods
Hypereutectic pistons
Internal front/external rear engine balance
Cylinder Heads:
BluePrint aluminum cylinder heads (H8002K)
64cc chamber
2.02 in. intake/1.60 in. exhaust valves
195cc intake/75cc exhaust runners
Roller Cam specs:
.477 intake/.471 exhaust
202 intake/212 exhaust duration @.050 - 115-degree lobe separation
Ignition timing:
32 degrees total at 3,500 rpm
Also includes:
Valve covers
Harmonic balancer
Spark plugs
Spark plug wires
Standard rotation long style water pump
Waterneck and thermostat
Fuel pump
Oil pan
Timing cover
Aluminum intake
HEI distributor
600 cfm carburetor
Dyno test results shipped with engine