Bridge Type Car Dent Puller Dent Repair Tool

Bridge Type Car Dent Puller is a must-have tool for paintless dent repairers and DIY, works well on dents and hail damage. Specifications:

- Type: Bridge type
- Material: Aluminum, Plastic
- Pulling Bridge Length: 19.5cm/7.7 inch
- Puller Tab Size: 3.5 3.5cm/1.4 1.4 inch, 3 3cm/1.2 1.2 inch, 2.6 2.6cm/1 1 inch, 4 2.6cm/1.6 1 inch, 3.2 2cm/1.3 0.8 inch, 2 1.2cm/0.8 0.5 inch
- Net Weight: 0.255kg/9 oz Package Contents:

- 1 Dent Puller Tool
- 1 x Sucker
- 1 x Scraper
- 1 x Rubber Stick
- 7 x Puller Tabs
- NOTE: The kit doesn't include Hot Glue Gun and Glue sticks, they can be bought separately on our website. How to use Car Dent Puller:

- First, review the damage on your car and if you are not sure where is the dent, please, check our Reflect Board that helps to detect the deformation.
- Once the dent is measured, clean the surface with alcohol.
- Select the suitable size of the glue tab and apply hot melted glue on it
- Quickly place the glue tab on a dent and press lightly. Let the glue cool down and adhere properly (5 minutes). The cooling time should be less than 10 minutes and should be shorter slightly in winter.
- Mount the glue tab in a dent puller, adjust the height and pull up the dent until it disappears
- Remove the glue tab with plastic spatula and alcohol spray If you are still not sure what is the best tool for you check our blog post How you can remove dents yourself with the right tools and patience.