Speed Science 462 views Claim this Business♡

Please allow for an extra 1-2 weeks from supplierTEGIWA Thermal Gasket. This gasket helps reduce intake air temps by removing the direct connection of the intake manifold to the throttle body. By placing this thermal shield between the intake manifold and the throttle body, you will help reduce the ...

TEGIWA B-series Throttle Position Sensor. This is a brand new replacement TPS sensor for your B-series engine. Old or worn out TPS sensors cause poor fuel economy, hesitation, stuttering, poor emissions and other performance related problems. TPS sensors have a limited life span and over time build ...

Includes: 1st-2nd Hardened Sleeve, Springs, and Brass Synchros Fitting 1992-2001 Integra GSR, B17A, JDM YS1 (Integra XSI/RSI), Integra Type R, B16 Hydro, 1999-2000 Civic Si with case ID (S80 Y80 YS1 Y21 S4C)

Includes: 5th-Reverse Hardened Sleeve, Springs, and Brass Synchros Fitting: 92-01 GSR/ITR/B16/LS

Includes: 1st-2nd-3rd-4th-5th-Reverse Hardened Sleeves, Springs, and Brass Synchros Fitting: 1992-2001 Integra GSR, B17A, JDM YS1 (Integra XSI/RSI), Integra Type R, B16 Hydro, 1999-2000 Civic Si with the case ID (S80 Y80 YS1 Y21 S4C)

Includes: 1st-2nd Hardened Sleeve, Springs, and Pro Series Carbon Synchros Fitting: 1992-2001 Integra GSR, B17A, JDM YS1 (Integra XSI/RSI), Integra Type R, B16 Hydro, 1999-2000 Civic Si with the case ID (S80 Y80 YS1 Y21 S4C)

Includes: 3rd-4th Hardened Sleeve, Hub, Springs, and Pro Series Carbon Synchros Fitting:B Series Integra GSR, B17A, JDM YS1 (Integra XSI/RSI) Integra Type R, B16 Hydro, 1999-2000 Civic Si with the case ID of (S80 Y80 YS1 Y21 S4C)

Includes: 5th-R Hardened Sleeve, 5-R Springs, Pro Series Carbon 5th Synchro, and Brass Reverse Synchro Fitting: 92-01 GSR/ITR/B16/LS

Includes: 1st-2nd-3rd-4th-5th-Reverse Hardened Sleeves, Springs, and Pro Series Carbon Synchros (brass reverse) Fitting: 92-01 Integra B series LS RS GS with case ID (S80 Y80 YS1)

Includes: 1st-2nd-3rd-4th-5th-Reverse Hardened Sleeves, Springs, and Pro Series Carbon Synchros (brass reverse) Fitting: 1992-2001 Integra GSR, B17A, JDM YS1 (Integra XSI/RSI), Integra Type R, B16 Hydro, 1999-2000 Civic Si with the case ID (S80 Y80 YS1 Y21 S4C)

Torque Solution Thermal Intake Manifold GasketsApplications: Honda Del Sol DOHC VTEC 1994-1996 B16a1 Torque Solution Thermal Intake Manifold Gaskets use a proprietary gasket material that lowers intake temps by reducing heat transfer from the head to the intake manifold. These gaskets can be used to...

Torque Solution Thermal Intake Manifold GasketsApplications: Honda Civic Si 1999-2000 B16a1 Torque Solution Thermal Intake Manifold Gaskets use a proprietary gasket material that lowers intake temps by reducing heat transfer from the head to the intake manifold. These gaskets can be used to replace ...

HONDA B16A/18C. High Performance dual valve spring and Titanium retainer set. Additional Information:Install at 34.00mm to give seat pressure of 85lb. Coil bind is at 18.50mm.

HONDA B16A/18C. Racing valve spring set. Additional Information:High Performance dual valve spring set to fit OEM retainers. Install at 34.00mm (1.338") to give seat pressure of 85lb. Coil bind is at 18.50mm.

VALVE Lift @ TDC Intake: 1.96mm Exhaust: 1.40

VALVE Lift @ TDC Intake: 3.91mm Exhaust: 2.70

Note: Please check availability with us before ordering.Special design cams, to suit high power turbocharged B series engines in the 600-1000HP range.Primary & Secondary lobe specifications are: Intake 250 & 254 / Exhaust 250 & 250 Degrees advertised duration. Intake 7.00mm & 8.60mm / Exhaust 7.00mm & 7.00mm lift. Please read the breaking in procedure in tips and tricks.

VALVE Lift @ TDC Intake: 5.68mm Exhaust: 4.40

VALVE Lift @ TDC Intake: 4.70mm Exhaust: 3.86

Note: Please check availability with us before ordering.224/224 Degrees duration @ 0.050" cam lift,.480"/.480" lift.Additional InformationLopey idle cam, requires hi-stall or manual. Requires ECU reflash.

TEIN S.TECH Spring is an excellent step towards suspension tuning.They offer approximately a 1.5 inch drop for a more aggressive appearance. Comes with a 1 year limited warranty.Spring length is guaranteed not to sag more than 5mm and to be clear of any manufacture defects.Features - One year limit...

The Cusco Type RS LSD had proved to be capable of competition use in the All Japan Gymkhana Championship without overhauling a single time during the season. With all drivers and teams finishing with good or championship results at the end of the season.According to Cusco's in house research, initia...

All Insane Shafts come with a free tub of Redline High Temp CV Grease and 2 new cv boot clamps. We STRONGLY recommend repacking the outer cv's with this grease. Failure to do so will almost certainly result in premature CV failure. 88-1991 Crx B-Series B16a1 (Jdm Crx)Insane Shafts 1988-1991 Honda Jd...