Techstyle 5 views   4 clicks ♡

Overview(LS-WNRS) is a magnetic in-wall retrieval kit built for “blind" cable fishing through finished walls and ceilings. It’s designed for retrofit runs where you can’t see the pathway, helping you connect an entry point to an exit point faster and with less frustration. Features- 24" flexib...

OverviewThe LS-WEMINI Wall-Eye™ Mini is a compact inspection viewer with an integrated flashlight, designed to let installers see inside wall cavities, ceilings, and voids before drilling or cutting. It allows visual confirmation of obstructions through a small access hole, helping reduce mistakes...

OverviewThe LS-GR-MINI Grabbit Mini is a compact telescoping pole designed to push, guide, and retrieve cables in tight, limited-access spaces. It extends to 10 ft (3048 mm) for reach in ceiling voids and wall cavities, and collapses down to 22" (559 mm) for easy carry and storage. It is a practical...

OverviewThe LS-GR3BB is a standalone 3 ft (914 mm) FiberFuse fiberglass push/pull rod with bullnose metal tips at both ends, designed for pushing or pulling wire through wall cavities, ceiling spaces, and other tight pathways. It is an economical “grab-and-go" rod for short runs where you want con...

OverviewThe LS-GR12 is a 12 ft (3.66 m) fiberglass push/pull rod designed for guiding, pushing, and retrieving low-voltage cables through wall cavities, ceiling voids, and other confined spaces. It provides additional reach over shorter rods while maintaining controlled flexibility for accurate rout...

OverviewThe LSDi Premium Freeform Masonry Bit (LS-FFMB3836) is a heavy-duty percussion masonry drill bit built for clean, accurate drilling through masonry materials. It features a 118° carbide tip for precise feeding and cleaner holes, and is fabricated in the USA by Freeform to LSDi standards. Fe...

OverviewThe LS-FF3872F is a Freeform flexible auger bit designed for long, curved drilling paths through timber framing and wall cavities. With a length of 72" (1829 mm) and a 3/8" (9.5 mm) diameter, it allows installers to drill through multiple studs or plates from a single access point, making it...

OverviewThe LS-FF3848F is a Freeform flexible auger bit designed for drilling long, curved paths through timber framing and wall cavities during retrofit installations. With a length of 48" (1219 mm) and a 3/8" (9.5 mm) diameter, it allows installers to reach across multiple studs from a single acce...

Premium freeform bit 1/2" x 72" (12.7mm x 1828mm)

OverviewGeorge Risk Industries 6644 (LS-GRI-6644) is a ready-to-install resistor pack used on supervised alarm contact loops. It combines two resistors in a compact packaged assembly, saving time versus soldering loose resistors in the field and helping keep installs consistent. Features- Pre-built...

OverviewThe CZ-BL3 LSDi 3' Luminous Bullnose Rod is a flexible, glow-in-the-dark fiberglass rod designed for pushing, guiding, and retrieving cables through walls, ceilings, and other confined spaces. Its compact length and rounded bullnose tip make it ideal for controlled cable runs where precision...

OverviewZ Tip - Male Threaded Connector Tip (LS-ZTIP) is a threaded “touch-and-retrieve" accessory designed for wire deep inside tight cavities where fingers and standard hooks cannot reach. It is built to work with compatible threaded rod systems and telescoping poles, letting you grab, hold, and...

Creep-Zit Tip 6ft. x 1/8" Male Threaded Mesh Pull Sock - This non-conductive pull sock works like a “chinese finger trap" to cover and securely pull wires up to one RG6 or equivalent in size.

Quickly Setup Your Wire Spools On-Site without Unnecessary Bulk!The DeCoil-Zit is a collapsible wire reel/spool holder that can be quickly assembled or disassembled for on-site use and easy storage. Available in two sizes: standard for reels up to 508mm diameter (Model DCZ) and large for reels up to...

Quickly Setup Your Wire Spools On-Site without Unnecessary BulkThe DeCoil-Zit is a collapsible wire reel/spool holder that can be quickly assembled or disassembled for on-site use and easy storage. Available in two sizes: standard for reels up to 508mm diameter (Model DCZ) and large for reels up to...

Creep-Zit™ 3ft. & 6ft. Single Replacement RodsThese single rods allow you to replace lost rods or add length to your Creep-Zit Kits. Not compatible with RoyRods Quick Connect.

Creep-Zit™ Premium Accessory Tip Kit Creep-Zit™ Premium Accessory Tip Kit - Threaded Connector Premium Accessory Tip KitA Complete Tip Kit and Case for Your Creep-Zit System!This kit contains a wide range of specialized threaded connector tips for your Creep-Zit™ system. The kit is intended to...

This is our most advanced and best value threaded connector rod kit for running wire and cable.This kit contains:- Five FiberFuse™ 6ft. push/pull rods with male and female threaded connector ends- One Luminous (glows in the dark) FiberFuse™ 6ft. push/pull rod with male and female threaded connec...

Creep-Zit Replacement Threaded Male Bull Nose Ends (5-pack)Includes five threaded male bull nose Connectors.

Creep-Zit™ Luminous Whisk Male Threaded Connector Tip - This tip is shaped like a whisk to help guide your rods over obstructions, beams, insulation and other structures. The multi-spoked luminous whisk also acts as a “wheel," allowing you to accurately steer the tip across most surfaces.

Heavy Duty Magnet Male Threaded Connector TipA heavy duty earth magnet designed to retrieve ferrous material such as ball chain and/or dropped tools. A must for wall fishing

Creep-Zit Male Threaded Flex Tip -This tip provides a bendable 4" extension for your rod that can be bent at an angle or in an offset configuration, used when a straight rod would hang up.

Creep-Zit Drag-Zit Magnet Male Threaded Connector Tip - Compatible with both the Creep-Zit rods and the Grabbit telescoping poles (with included adapter). This handy tip is helpful in crawl spaces, ceiling spaces and other hard to reach areas.RRP $74.48 incl gst

Creep-Zit Replacement Threaded Connector Pack - Includes five male threaded connectors, five female threaded connectors, and two bull nose replacement tips. The nonthreaded female bull nose replacement tips must be glued-onto your rods using strong, two part epoxy (not included).RRP $74.48 incl gst