The Boardroom 18 views Claim this Business♡

APS Bushings 0.55" - CX ShortThe APS compound is very lively, which offers high rebound with lots of control and lean. This formula does not change much when you tighten the kingpin nut past snug (meaning you are no longer able to rotate the bushing by hand).Keep in mind that the rounded edge goes t...

VNLA - Anniversary Blueprint Pro Sure Grip - Avanti 0.50" / 0.55"

This kit is specifically designed for Dual Kingpin Skateboard Trucks. Lots of E-Skate brands use these trucks and they are traditionally unstable or too tight. Our kit helps the trucks work to their full potential.Bushing Duros Explained:APS 97.5a Box (Tightest) - Our hardest compound for riders loo...

This kit is specifically designed for Dual Kingpin Skateboard Trucks. Lots of E-Skate brands use these trucks and they are traditionally unstable or too tight. Our kit helps the trucks work to their full potential.Bushing Duros Explained:APS 97.5a Box (Tightest) - Our hardest compound for riders loo...

Riptide Verreal RS - Ownboard - Meepo Hurricane & Flow - Eovan - Onsra - Boundmotor - Lyacon TRX 2.0 - Propel Pivot - Tynee Dual Kingpin Bushing Kit (DKP)This kit is specifically designed for Dual Kingpin Skateboard Trucks. Lots of E-Skate brands use these trucks and they are traditionally unstable...

This kit is specifically designed for Dual Kingpin Skateboard Trucks. Lots of E-Skate brands use these trucks and they are traditionally unstable or too tight. Our kit helps the trucks work to their full potential.Bushing Duros Explained:APS 97.5a Box (Tightest) - Our hardest compound for riders loo...

This kit is specifically designed for Dual Kingpin Skateboard Trucks. Lots of E-Skate brands use these trucks and they are traditionally unstable or too tight. Our kit helps the trucks work to their full potential.Bushing Duros Explained:APS 97.5a Box (Tightest) - Our hardest compound for riders loo...

Carver C7 Bushings (1 Pair)This pack is designed for the trucks listed above which take 0.4" / 0.5" height bushings.

Riptide’s KranK is the highest rebound formula to date from RipTide, and designed specifically to change under pressure and is controlled by the amount of clamp pressure you subject it to when tightening the kingpin nut.The RipTide KranK Short Street Cone & Street Barrel Bushings are for use in st...

The RipTide APS Short Street Cone & Street Barrel Bushings are for use in standard skateboard trucks (such as Independent, Thunder, Ace,.) and are also fully compatible for the Yow Meraki S5 surfskate trucks!Overall, this setup of Short Street Cone/ Street Barrel is for riders looking for still a su...

The RipTide APS Short Street Cone & Street Cone Bushings are for use in standard skateboard trucks (such as Independent, Thunder, Ace,.) and are also fully compatible for the Yow Meraki S5 surfskate trucks!Overall, this setup of Short Street Cone/ Street Cone is for riders looking for a more lean/tu...

The RipTide KranK Short Street Cone & Street Barrel Bushings are for use in standard skateboard trucks (such as Independent, Thunder, Ace,.) and are also fully compatible for the Yow Meraki S5 surfskate trucks!KranK is the highest rebound formula to date from RipTide, and designed specifically to ch...

RipTide Carver CX Krank Cone SurfSkate BushingsThis is the stiffer and less lean CX bushing set up = one cone and one barrel bushing kit. The Krank formula gives you less lean, it is not as responsive as the APS bushings. The barrel and cone combo is a lot stiffer. If you are looking to restrict the...

This kit is specifically designed for Dual Kingpin Skateboard Trucks. Lots of E-Skate brands use these trucks and they are traditionally unstable or too tight. Our kit helps the trucks work to their full potential.Bushing Duros Explained:APS 97.5a Box (Tightest) - Our hardest compound for riders loo...

Sold as a set of two with a Sticker .975" Dia x.75" High (24.77mm Dia x 19mm High) For use in trucks that require Tall Bushings (such as Ronin, Bear Kodiak, Arsenal) Tall Barrels offer the next step up in stability above the Tall Cones and are often used for a broad range of skating disciplines depe...

RipTide Team Riders Lyde Begue & Connor Ferguson!100% CottonLogo Front & BackComfortable & StylishA true tie-dye shirt - each one is unique!

APS Barrel Longboard Bushings are sold as a Pair with a sticker and No Washers are included. Bushing Height: 0.6" - Bushing Diameter: 0.98"The APS compound is very lively, which offers high rebound with lots of control and lean. This formula does not change much when you tighten the kingpin nut past...

Sold as Pair, with small cup washers & a sticker - Sized to fit properly in conventional "Indy-style" trucks- Custom APS Urethane Formula for ultra-performance and sweet rebound- .975" Dia x.4" High (24.77mm Dia x 10.2mm High) - Stiffer bushings will result in a more resistant board, which can be an...

Cone skateboard bushings are sold as a PAIR with a sticker and NO WASHERS are included: - The APS formula rides a couple of points softer than they test, so order accordingly - Hard durometer bushings (95a - 97.5a) are for heavier-weight riders (over 135lbs) and allow for a nice tight set-up.- Mediu...

FatCone skateboard bushings are sold as a PAIR with a sticker and LARGE FLAT WASHERS are included: - The APS formula rides a couple of points softer than they test, so order accordingly - Hard durometer bushings (95a - 97.5a) are for heavier-weight riders (over 135lbs) and allow for a nice tight set...

Chubby skateboard bushings are sold as a PAIR with a sticker and LARGE FLAT WASHERS are included: - The APS formula rides a couple of points softer than they test, so order accordingly - Hard durometer bushings (95a - 97.5a) are for heavier-weight riders (over 135lbs) and allow for a nice tight set-...

Sold as Pair with Sticker. - .975" Dia x.75" High (24.77mm Dia x 19mm High)- APS rides a couple of points softer than they test, so order accordingly - Hard durometer bushings (95a - 97.5a) are for heavier-weight riders (over 125lbs) and allow for a nice tight set-up.- Medium durometer bushings (85a...

Canon skateboard bushings are sold as a pair with a sticker and NO WASHERS are included: - The APS formula rides a couple of points softer than they test, so order accordingly - Hard durometer bushings (95a - 97.5a) are for heavier-weight riders (over 135lbs) and allow for a nice tight set-up.- Medi...

Street Cone skateboard bushings are sold as a PAIR with a sticker and SMALL CUP WASHERS are included: - Sized to fit properly in conventional "Indy style" trucks- Custom APS Urethane Formula for ultra-performance and sweet rebound.- Hard durometer bushings (97.5a) for heavier weight riders & are des...