the hub cycle centre 177 views   1 clicks Claim this Business♡

New Updated Item #BBT-79.3A precision CNC-machined aluminum tool for the installation and removal of select threaded bottom brackets with 12-notch tool fittings, including SRAM® BSA DUB®, Race Face® Cinch®, Rotor® BSA30, and others. Manufactured in-house by Park Tool, anodized for easy identifi...

The Shimano TL-FC16 tool is compatible with Hollowtech II crankarms and 2-piece cranks. It has a multi-tooth profile and is made of robust plastic. TL-FC16 is applied directly to the crank bolt by hand without an additional tool and tightened with 0.7 to 1.5 Nm.Compatibility: Hollowtech II, 2-piece

33/34mm Headset Wrench. Suitable for bikes or some scooters.Wrench is of 4mm Steel Contruction.

Heat treated alloy tool steel, one inch base fits wrench or bench vise. The FR-5.2GT is designed specifically for use when removing and installing cassette lockrings from thru axle hubs.FR-5.2GT FEATURES:- - Utilizes a 12mm guide pin to stabilize the tool in use- Fits 12-spline cassette lockrings fr...

Style, function and quality to enhance any tool collection.The Classic Hex Rod will instantly enhance any tool collection with its style, function and quality. It features a high strength, extremely hard chrome-vanadium steel and is treated with a super durable chrome finish. The long leverage desig...

Chrome-plated 8mm Hex Pedal Wrench Tool, with a dual-compound handle for extra grip and comfort, and an additional ball driver.

A worn chain shifts poorly and wears sprockets at an accelerated rate. The CC-3.2 is a go/no-go gauge designed to accurately indicate when a chain reaches.5% and.75%, the points at which most chain manufacturers suggest replacement. For 9 and 10-speed chains, replace chain just as the gauge fits the...

FR-5.2G CASSETTE LOCKRING REMOVER WITH GUIDE PINHeat treated alloy tool steel, one-inch base fits wrench or bench vice. Thin wall construction allows use without removal of cones and locknuts. The FR-5.2G has 12 splines that are approximately 23.4mm across.FEATURES - Fits Shimano®, SRAM® (includin...

New version CC-4.2A worn bike chain causes poor shifting performance and can even wear out drivetrain components, leading to expensive problems. The Park Tool CC-4.2 Chain Checker is a drop-in gauge that measures bicycle chain wear. The laser-cut CC-4.2 measures a long section of chain and comes int...

Shimano crankset with their new direct mount chainring attachment system you'll need a tool to remove and install the chainrings.12 speed Shimano cranks that use their direct mount chainring attachment system Crankset compatibility: - XTR FC-M9100, FC-M9120, FC-M9120- XT FC-M8100, FC-M8120, FC-M8130...

For SRAM/Shimano Cassettes and ZEB, Pike, Lyrik, SID, Revelation, Reba, and Paragon forks