The Hydro Centre 224 views   3 clicks Claim this Business♡

The Antelco Greenback is an on-off device to control the water flow in low pressure irrigation systems from rain tanks to non-pressurized containers.- Simple on-off operation and straight through flow.- Operating pressure range up to 300 kPa.- Excellent tube retention due to sharp acetal barb.- Stra...

These clips fit onto the hose to prevent any leaks.Clips have smooth edge require no tools for installation.Operating pressure range up to 300kPa.UV stabilised for long life.

25mm internal diameter tubing.Made from low density poly pipe, it is soft, durable and flexible.Refer to our reducing tee and branch tee products that can be used with this piping to set up your own water systems.Sold per mtr.

High grade measuring Jugs various sizes. - Chemical Resistant- UV stabilized- Dishwasher and microwave safe- Temperatures up to 110ºC- Clear increments.

15mm (½"

It is important to get the right measurements when adding nutrients, additives and enhancers. This measuring jug helps to achieve that

Aqua One Filter Pads work alongside your current filtration set up to help remove unwanted particles and debris before it recirculates throughout your aquarium.Aqua One Filter pads are able to be cut and shaped to suit any filtration system and assist in maintaining ideal water conditions.Aqua One C...

To install, drill a 32mm hole into the side or bottom of a tank.Push one half of the outlet through the hole with the rubber washer to seal around the part of the container which will contain water.Screw the nut on to the other side. It makes a perfect leak proof seal on a flat surface.

Nutrifield Feeder Rings are a must have for anyone using the 27ltr Pro Pots. The feeder rings simply click into place - and connect to your plumbing - making sure your plants are receiving an even feed. They are made from a durable and easy to clean plastic. The mesh basket will fit into the ring to support your plantNote: Fits 27ltr Pro Pot only.

Nutrifield Feeder Rings are a must have for anyone using the 27ltr Pro Pots.The feeder rings simply click into place - and connect to your plumbing - making sure your plants are receiving an even feed.They are made from a durable and easy to clean plastic. The mesh basket will fit into the ring to support your plantNote: Fits 27ltr Pro Pot only.

To install, drill a 32mm hole into the side or bottom of a tank.Push one half of the outlet through the hole with the rubber washer to seal around the part of the container which will contain water.Screw the nut on to the other side. It makes a perfect leak proof seal on a flat surface.

13mm internal diameter.Made from low density poly pipe, it is soft, durable and flexible.Refer to our reducing tee and branch tee products that can be used with this piping to set up your own water systems.Sold per mtr.

These are used to plug the end of any PVC or Poly pipes

19mm / 3/4" Barbed Tub OutletTo install, drill a 32mm hole into the side or bottom of a tank.Push one half of the outlet through the hole with the rubber washer to seal around the part of the container which will contain water.Screw the nut on to the other side. It makes a perfect leak proof seal on a flat surface.

Replacement fittings to suit all sizes of FlexiTanks.

Plastic One Way Inline Check Valve/Non Return Valve - Size: 4mm- Length: 52mm- Non-toxic PE food grade material- High temp resistant

These are used to plug the end of any PVC or Poly pipes

These are used to plug the end of any PVC or Poly pipes

Blumat Drip System Distribution Dripper Extension Pack with 10 drippersBox Contains: - 8 x Drippers- 2 x End drippers- 1 x End plug- 1 x 2M of 3MM feeding tube

4mm Barbed adjustable flow dripper 360 degree.Connects to 4mm tubing. Flow rate from 0 - 33Lph at 100kpa. The amount of water emmited can be adjusted via a screw that controls pressure.