Load Correction Device The Lighting Centre NZ

Are your LED lights inexplicably glowing or flickering when the power is off? You may have a ghost load or current leakage. You might be able to fix it with a load correction device. Just wire the device into the circuit (behind the switch plate) to stabilise the circuit.

Is the minimum load on your dimmer too low for your new LED lighting? You may be able to fix this with a load correction device. It works as a dummy load on the circuit, which can correct issues with minimum load requirements on a dimmer.

– Can stabilise circuits that flicker when the lights are off. Use one load correction device per switch in the case of 2-way switching.

– Can also be used for dimming of small loads (e.g. cabinet and wall lights) where the minimum load of the dimmable driver is higher than the load of the circuit.

– In 2-wire connection the load correction device reduces the minimum power of load required by the dimmer or switch for correct operation.

– The Load ...