TL-TAPOC420S4 - TP-Link Tapo C420S4, 4 x Smart Wire-Free Security Camera System, with HUB, Battery Powered
- 2K QHD-Now with 1.7 times more pixels than 1080p, providing clearer videos and photos.
- 180-Day Battery Life -The rechargeable and removable battery with a low-power protocol extends your usage.
- Full-Colour Night Vision-Reveal high-fidelity details and colour at night with the starlight sensor.
- Smart AI Detection and Notification-Smart AI identifies people, pets, and cars, notifying users as needed.
- Wire-Free Placement-No wires mean you can place the cameras almost anywhere inside or outside-whatever works for you!
- Light and Sound Alarm-Triggers sound and light as an alarm when motion is detected.
- Two-Way Audio-Enables communication through a built-in microphone and speaker.
- Flexible Storage Choices-Save recorded videos on the hub-installed microSD card† (up to 512 GB) or by using Tapo Care cloud storage services.
- IP65 Water&Dust Resistant-Offers excellent waterproof and dustproof performance for outdoor scenarios. CAMERA Image Sensor 1/3“
Resolution 2K QHD (2560 × 1440 px) Lens F/NO: 1.61±10%; Focal Length: 3.18mm±5% Viewing Angle 113° Night Vision 850 nm IR LED up to 49 ft/15m AUDIO Audio Communication 2-way audio Audio Input & Output Built-in microphone and speaker NETWORK Wi-Fi Protocol IEEE 802.11b/g/n, 2.4 GHz Protocol TCP/IP, ICMP, DNS, HTTPS, TCP, UDP Frequency 2.4 GHz Wireless Security WPA/WPA2-PSK ACTIVITY NOTIFICATIONS Input Trigger Motion detection, Person
detection, Pet detection, Vehicle detection. Output Notification Notification,Snapshot(Tapo care),Clips(Tapo
care). ENVIRONMENT Operating Temperature -20℃~45℃(-4°F ~113 °F ) Storage Temperature -20℃~60℃ (-4°F~140°F) Operating Humidity 10%~90%RH, Non-condensing Storage Humidity 5%~90%RH, Non-condensing PACKAGE CONTENTS Package Contents Tapo C420 Cameras (Battery Included) - micro-USB
Tapo H200 Hub
USB Adapter
USB Adapter Cable
DC Power Adapter
Mounting Screws
Mounting Templates
Camera Brackets
Quick Start Guide
RJ45 Ethernet Cable HARDWARE Button Camera Button: Reset/SYNC Button
Hub Button: Reset Button; SYNC Button Indicator LED Camera Indicator LED: System LED
Hub Indicator LED: System LED Adapter Input Camera Adapter Input: 100-240V, 50/60Hz
Hub Adapter Input: 100-240V, 50/60Hz, 0.3A Adapter Output Camera Adapter Output: 5.0V, 1.0A
Hub Adapter Output: 9.0V, 0.85A Dimensions (W x D x H) Camera Dimensions: 4.35 x 2.52 x 2.52in.
(110.6 64.2 64.2mm)
Hub Dimensions (L x W x H): 2.8 x 2.8 x 1.2 in.
(71.45 71.45 31.25mm) VIDEO/IMAGE Video Compression H.264 Frame Rate & Resolutions 15/20 fps Video Streaming 2K QHD For additional version information, please go to the support page.
Battery life of up to 180 days is based on TP-Link’s laboratory testing triggering 10-20 events per day. Actual battery life may vary based on device settings, use, and environmental factors.
†microSD card needs to be purchased separately.
Subscribe: https://www.tapo.com/en/tapocare/
Notes: Connect up to 4 cameras to a hub.