Thrash Garage 263 views Claim this Business♡

Profender Rear Shocks (Pair) to suit:Toyota Hilux Surf 130 Series 1989-1997Toyota Hilux Surf 185 Series 1996-2003Toyota Landcruiser Prado 90/95 Series 1996-2003 Includes:2x Rear Shock Absorbers - PF-6007PDetails:- 57mm Body diameter- 20mm diameter piston rod- 40mm diameter piston- Automatic Valve- P...

Genuine Nissan Door Stopper / StrapOEM Fitment:Nissan GTR R35Common Upgrade for:Nissan Skyline R34 CoupeNissan Skyline R34 GTRNissan Silvia S15

Genuine Nissan Door Stopper / StrapOEM Fitment:Nissan GTR R35Common Upgrade for:Nissan Skyline R34 CoupeNissan Skyline R34 GTRNissan Silvia S15

Genuine Nissan Boot / Trunk Rubber StopperSuits:Nissan Silvia S14Nissan Skyline R32Sold Individually - 2 pieces required per vehicle

Genuine Nissan Boot / Trunk Rubber StopperSuits:Nissan Silvia S14Nissan 180SXSold Individually - 2 pieces required per vehicle

Genuine Nissan Boot / Trunk Rubber StopperSuits:Nissan Silvia S14 Sold Individually - 2 pieces required per vehicle

GenuineSuits:Nissan Silvia S13Nissan Silvia S14Nissan Silvia S15Nissan 180SXNissan Skyline R31Nissan Skyline R32Nissan Laurel C33Nissan Cefiro A31Sold Individually - 2 pieces required per vehicle

Genuine Nissan Bonnet Rubber StopperSuits:Nissan Silvia S14Nissan Silvia S15 Sold Individually - 2 pieces required per vehicle

Genuine Nissan Bonnet Rubber StopperSuits:Nissan Silvia S13Nissan Silvia S14Nissan Silvia S15Nissan 180SX Sold Individually - 2 pieces required per vehicle

Genuine Nissan Bonnet Rubber StopperSuits:Nissan Silvia S13Nissan Silvia S14Nissan 180SX Sold Individually - 2 pieces required per vehicle

74mm Electronic Throttle Body- 74mm Bore size- Dual potentiometer redundancy- Bosch quality and performance- Includes groove on inlet port flange- Includes mating connector kitTechnical Specs:See attached image.Further details on E-Throttle setup can be found in the PC Link helpfile.

Throttle Position Sensor. Supports clockwise and counter-clockwise installations. 6 wire flying lead.Wiring instructions are provided in the box.Features - 8 mm D-Shaft Rotary Sensor- Hall Effect non-contact technology- Long life - extremely robust- IP68 protection- 32mm PCD mounting- Redundant outp...

Link TCC04 4 Channel EGT to CAN module, powered by CANcheckedThe TCC04 EGT to CAN module allows you to connect up to four Type-K thermocouples and send the values via CAN bus and/or monitor them directly on your wireless enabled device.Type-K thermocouples are suitable for various applications such...

Link TCC06 6 Channel EGT to CAN module, powered by CANcheckedThe TCC06 EGT to CAN module allows you to connect up to six Type-K thermocouples and send the values via CAN bus and/or monitor them directly on your wireless enabled device.Type-K thermocouples are suitable for various applications such a...

Kit includes the G4 KnockLink visual warning light and a knock sensor with loom. The KnockLink is a self-calibrating, visual knock warning tool. This kit is designed for tuning, street and race use.The G4 KnockLink is the only detonation warning device on the market that requires no setup. Other sys...

Rugged 4 key CAN Keypad with interchangeable 15mm inserts (sold separately).Custom button inserts and configurable RGB indicator rings per button allow for extremely flexible set-ups.The keypad is designed for ultimate reliability - IP67/IP69K water and dust resistant, -40 to 70 operating temperatur...

Link TCC08 8 Channel EGT to CAN module, powered by CANcheckedThe TCC08 EGT to CAN module allows you to connect up to eight Type-K thermocouples and send the values via CAN bus and/or monitor them directly on your wireless enabled device.Type-K thermocouples are suitable for various applications such...

Link's external E-throttle (Drive by Wire) module works with Link's G4X ECUs (except the entry level AtomX), plus G4 ECUs (Storm and above) to give you full control of your throttle setup, allowing a faster more precise throttle response.Replace your old mechanical throttle linkage with an advanced...

4 x EV14 1000cc fuel injectors in their unmodified form as they come from Bosch.These injectors are specifically designed by Bosch to be flex fuel (ethanol) compatible and also have an exceptional spray pattern and low pulse width characteristics.Compatible with all Link ECU’s.Features:- 1000cc/mi...

Add-on GPS module for the MXS and MXG Strada Dashes. 1.3m cable length.Features: - Sample lap and split times as well as speed, position and acceleration - all the information needed for engine tuning as well as for improving your driving technique.- Supports more than 2000 tracks worldwide- Easy to...

Link’s CAN Lambda is an easy to use CAN module that provides digital wideband sensor control via CAN bus and is compatible with leading aftermarket ECUs.If using the CAN Lambda with a G4 /G4X PlugIn ECU use a Link CANPCB cable to access the CAN port on the PlugIn PCB and a Link CANF field insertab...

A rugged 8-key CAN keypad with interchangeable 15 mm inserts (sold separately).Customisable button inserts and configurable RGB indicator rings for each button provide exceptional flexibility across a wide range of applications.Designed for maximum durability and reliability, the keypad features IP6...

• Highly recommended item to greatly simplify the wiring connections between the Link LS Terminated Engine Harness and the car chassis.• When added to the Link LS harness the user only needs to connect 2 to 4 flying lead wires themselves to have a complete wiring system capable of running an eng...

Rugged 12 key CAN Keypad with interchangeable 15mm inserts (sold separately).Custom button inserts and configurable RGB indicator rings per button allow for extremely flexible set-ups.The keypad is designed for ultimate reliability - IP67/IP69K water and dust resistant, -40 to 70 operating temperatu...