Thrash Garage 210 views Claim this Business♡

Now available! The GKTECH S14 Silvia / S15 200SX Silvia Rear Hubs. These are an OEM replacement part for the OEM part number: 43202-85F00.We made SURE these were ready for motorsport and daily driving needs, with testing including: Cyclical loading through a range of real world load cases including...

Now available! The GKTECH S14 Silvia / S15 200SX Silvia Complete Rear Hub Assembly, these are an OEM replacement part for the OEM part numbers: 43202-85F00 & 43210-AA100We made SURE these were ready for motorsport and daily driving needs, with testing including: Cyclical loading through a range of r...

The OEM swaybar bushes tend to wear, and can cause unpredictable movement and behavior of the sway bar, even more so when an upgraded thicker sway bar is installed. Having all this flexibility can reduce the performance from the sway bar, making your choice to upgrade stiffness, less of an upgrade w...

Aero mirrors to suit the Toyota JZX100. These mirrors are a direct replacement of the standard mirrors and can be installed within 5-10 minutes.Manufactured from high quality ABS plastic, these mirrors are ready to be installed straight from the box. No need to prepare or paint.NOTE: SOLD AS A PAIRN...

The GKTECH JZX 100 Braided brake lines are a direct replacement of the factory lines and are stronger (read: more reliable) than the factory rubber lines which are prone to breaking but they also eliminate the spongy feel of the standard brake lines. The front lines are also longer to compensate for...

The GKTech JZX Rear Traction Arms allow adjustment of the rear multi-link suspension.They can be adjusted to eliminate bump steer and alter other rear suspension traction settings to improve suspension response.The lengths on these arms are fully adjustable and with the right adjustments, you can ch...

The GKTECH on car adjustable Rear Lower Control Arms (RLCA's) allow adjustment of the rear multi-link suspension.Typically, adjustable LCA's can be adjusted to alter camber however we have incorporated some extra features.- CAD designed and FEA tested- 4130 Chromoly tube and clevis, TIG welded for s...

The GKTech JZX Rear Toe Arms give you the ability to adjust and tune your vehicle's rear toe.The lengths on these rear toe arms are fully adjustable to your specs when doing an alignment and with the right adjustments, straight line and cornering of your vehicle will be improved.- CAD designed and F...

The GKTECH Caster Arms offer the most amount of clearance available in a caster arm whilst also having on-car adjustment!Caster arms (aka tension rods) allow adjustment in vehicle castor to bring the wheels forward and increase steering response. In general, the more caster the better. Allowing shar...

S14/S15 Roll center correction kit balljoint shankwhich includes the top nut.To suit this product:https://thrashgaragenz.com/products/v2-s14-s15-bolt-on-angle-kit-rcc-kit? pos=1& sid=6db56351e& ss=r This shank taper suits the S14/S15 knuckle Sold individually, to suit SKU; S145RCK VEHICLE COMPATIBIL...

Introducing the new V2 GKTECH Super Lock Front Lower Arms — designed not only for drifters but also for grip enthusiasts, offering adjustment ranges from OEM length to 44mm and 30mm to 74mm.For drifters, these arms support up to 70 degrees of steering lock on the lead wheel and 65 degrees on the t...

The ABS module Nissan uses are renowned for being unpredictable, particularly when on track. The GKTECH ABS Delete manifold block are an easy bolt-on solution to remove the complete ABS system on your vehicle.We developed these kits after the frustration in trying to remove the ABS on our own cars.O...

Setting up a standalone hydraulic handbrake kit can be expensive and require more commitment than what you wanted, which is why we have created an in-line hydraulic handbrake kit.The in-line hydraulic handbrake kits are significantly cheaper to setup as you don't have the additional cost of more lin...

In a drift application when high steering angles are required, the steering link and knuckle position can align, making steering very difficult. This is known as steering bind or over centering and the best solution is to move forward the inboard mount on the steering rack. This can be achieved with...

The GKTECH high misalignment tie rods have 64 degrees of misalignment and also up to 15mm of bump steer correction built in.Although these may look pretty similar to other tie rod ends on the market, don't be fooled as they are different (in a good way). Almost all tie rod ends on the market that us...

This listing is for the 3 main rear arms being the RLCA, Toe arms and Traction arms! All the arms features;- CAD designed and FEA tested- High quality 5/8" PTFE lined rod ends offers a direct and predictable feel- Dust boots included- TIG Welded for superior strength- 4130 Chromoly tube with hex for...

Replacement PCMR12TES bearingUsed in the following GKTECH products:GT86 Toe arms - GT86-TOEXJZX100 Toe Arms PCMR12TES IMPERIAL METRIC ROD END BALL BORE SIZE ROD END BALL BORE SIZE 0.7500 in 19.0500 mm ROD END BALL WIDTH ROD END BALL WIDTH 0.8750 in 22.2250 mm THREAD LENGTH THREAD LENGTH 1.7500 in 44...

One of the very first GKTech sold was our universal steering wheels back in 2006. With literally over 1,000pcs of our leather wheels sold we thought it was time to mix it up a little.With the same robust structure but now available in either perforated leather or suede and available with either a re...

When installing a hydraulic handbrake in your car, you'd typically have to drill holes or weld a bracket in place. We understand that not everyone wants to do that, so we've made these bolt in brackets. The brackets bolt to the stock gearbox shifter hole and allows you to fit our hydraulic handbrake...

Replacement Used in the following GKTECH products:V1 Z33X-FLCA COM9T IMPERIAL METRIC HOUSING OUTER DIAMTER HOUSING OUTER DIAMTER 1.0937 in 27.7800 mm HOUSING WIDTH HOUSING WIDTH 0.4370 in 11.0998 mm BALL WIDTH BALL WIDTH 0.5620 in 14.2748 mm BALL BORE SIZE BALL BORE SIZE 0.5625 in 14.2875 mm BEARING...

The GKTECH Z33 and Z34 dual stud diff covers were purpose designed in house for grip racing, drifting and drag racing. With the Z33 and Z34 OEM diff cover using a single stud at the rear it is incredibly prone to breakage in high grip/hp setups. We are confident this is the BEST aftermarket diff cov...

The GKTECH R32/R33 GTR Skyline 5 speed short shifter is a direct replacement of the standard item and helps reduce the shifter throw by around 10% which helps increase shift time and also makes everything feel much tighter. The shifter itself is also 10mm shorter and has an added weight at the top f...

Kit Includes:Super Lock KnuckleBall Joint Shank0>44mm LCA'sOffset Rack SpacersM14 Super Adjustable Inner Rack EndsHigh Misalignment M14 Tie RodsUpper Camber Arms V2 Super Lock Chromoly LCA'sThe Super Lock LCA's are available in 2 different lengths. In most cases the shorter LCA's will be sufficient...

Replacement Used in the following GKTECH products: 350Z-RKBKREAR-BUSHS13X-RLBHS145-RLBH COM8T IMPERIAL METRIC HOUSING OUTER DIAMTER HOUSING OUTER DIAMTER 1.0000 in 25.4000 mm HOUSING WIDTH HOUSING WIDTH 0.3900 in 9.9060 mm BALL WIDTH BALL WIDTH 0.500 in 12.7 mm BALL BORE SIZE BALL BORE SIZE 0.5000 i...