Thrash Garage 263 views Claim this Business♡

74mm Electronic Throttle Body- 74mm Bore size- Dual potentiometer redundancy- Bosch quality and performance- Includes groove on inlet port flange- Includes mating connector kitTechnical Specs:See attached image.Further details on E-Throttle setup can be found in the PC Link helpfile.

Throttle Position Sensor. Supports clockwise and counter-clockwise installations. 6 wire flying lead.Wiring instructions are provided in the box.Features - 8 mm D-Shaft Rotary Sensor- Hall Effect non-contact technology- Long life - extremely robust- IP68 protection- 32mm PCD mounting- Redundant outp...

Link TCC04 4 Channel EGT to CAN module, powered by CANcheckedThe TCC04 EGT to CAN module allows you to connect up to four Type-K thermocouples and send the values via CAN bus and/or monitor them directly on your wireless enabled device.Type-K thermocouples are suitable for various applications such...

Link TCC06 6 Channel EGT to CAN module, powered by CANcheckedThe TCC06 EGT to CAN module allows you to connect up to six Type-K thermocouples and send the values via CAN bus and/or monitor them directly on your wireless enabled device.Type-K thermocouples are suitable for various applications such a...

Kit includes the G4 KnockLink visual warning light and a knock sensor with loom. The KnockLink is a self-calibrating, visual knock warning tool. This kit is designed for tuning, street and race use.The G4 KnockLink is the only detonation warning device on the market that requires no setup. Other sys...

Rugged 4 key CAN Keypad with interchangeable 15mm inserts (sold separately).Custom button inserts and configurable RGB indicator rings per button allow for extremely flexible set-ups.The keypad is designed for ultimate reliability - IP67/IP69K water and dust resistant, -40 to 70 operating temperatur...

Link TCC08 8 Channel EGT to CAN module, powered by CANcheckedThe TCC08 EGT to CAN module allows you to connect up to eight Type-K thermocouples and send the values via CAN bus and/or monitor them directly on your wireless enabled device.Type-K thermocouples are suitable for various applications such...

Link's external E-throttle (Drive by Wire) module works with Link's G4X ECUs (except the entry level AtomX), plus G4 ECUs (Storm and above) to give you full control of your throttle setup, allowing a faster more precise throttle response.Replace your old mechanical throttle linkage with an advanced...

4 x EV14 1000cc fuel injectors in their unmodified form as they come from Bosch.These injectors are specifically designed by Bosch to be flex fuel (ethanol) compatible and also have an exceptional spray pattern and low pulse width characteristics.Compatible with all Link ECU’s.Features:- 1000cc/mi...

Add-on GPS module for the MXS and MXG Strada Dashes. 1.3m cable length.Features: - Sample lap and split times as well as speed, position and acceleration - all the information needed for engine tuning as well as for improving your driving technique.- Supports more than 2000 tracks worldwide- Easy to...

Link’s CAN Lambda is an easy to use CAN module that provides digital wideband sensor control via CAN bus and is compatible with leading aftermarket ECUs.If using the CAN Lambda with a G4 /G4X PlugIn ECU use a Link CANPCB cable to access the CAN port on the PlugIn PCB and a Link CANF field insertab...

A rugged 8-key CAN keypad with interchangeable 15 mm inserts (sold separately).Customisable button inserts and configurable RGB indicator rings for each button provide exceptional flexibility across a wide range of applications.Designed for maximum durability and reliability, the keypad features IP6...

• Highly recommended item to greatly simplify the wiring connections between the Link LS Terminated Engine Harness and the car chassis.• When added to the Link LS harness the user only needs to connect 2 to 4 flying lead wires themselves to have a complete wiring system capable of running an eng...

Rugged 12 key CAN Keypad with interchangeable 15mm inserts (sold separately).Custom button inserts and configurable RGB indicator rings per button allow for extremely flexible set-ups.The keypad is designed for ultimate reliability - IP67/IP69K water and dust resistant, -40 to 70 operating temperatu...

The G4 KnockBlock is an essential tool for tuning and can aid in the early detection of incorrect ignition timing, lean air/fuel mixtures and mechanical issues. It is used it with ear buds, headphones or noise cancelling ear muffs and features special filtering to allow you to listen in and detect k...

Extreme Duty Fast Response EGT Temperature Probe.This bundle includes four EGTs. - Type K thermocouple probe- Exposed sensing junction for fastest response- Includes 316 SS adjustable compression fitting- Stainless steel protected wires- Designed for extreme engine test & racing environments

Rugged 15 button CAN Keypad with interchangeable 15mm inserts (sold separately). Two rotary encoders with 16 Blue indicator LEDs each. Four additional analog inputs allow additional sensors/switches to directly connect to the CAN Bus network through the keypad. The compact layout and inclusion of th...

Link’s CAN Lambda is an easy to use CAN module that provides digital wideband sensor control via CAN bus and is compatible with leading aftermarket ECUs.This bundle contains TWO CAN Lambda kits.If using the CAN Lambda with a G4 /G4X PlugIn ECU use a Link CANPCB cable to access the CAN port on the...

Extreme Duty Fast Response EGT Temperature Probe.Bundle includes 6 x Probes. - Type K thermocouple probe- Exposed sensing junction for fastest response- Includes 316 SS adjustable compression fitting- Stainless steel protected wires- Designed for extreme engine test & racing environments

Discover the next evolution in engine tuning with our advanced Direct Injection (DI) control module. The a highly configurable, cost effective and integrated solution, designed to give you full control of most modern solenoid type direct injectors and high-pressure fuel pumps.Each module can allow u...

AtomXSmall, but mighty!The AtomX can control up to 2 rotors or 4 cylinders with sequential injection and direct spark. Or, it can be used for up to eight cylinders using batch fire. Now featuring Knock Control.This makes it ideal for naturally aspirated engines that just need a re-tune and don't nee...

Link's highly anticipated PDM, the , is an intelligent Power Distribution Module that replaces traditional fuses and relays, putting you in complete control of your setup.The a programmable device that uses logic for the smart control of any outputs you have connected, meaning events and commands ca...

Replacement Engine Harness to cover a wide range of GM LS Engine Variations. Please note that due to the large number of Engines supported it may require user modification for some applications, see Installation Manual or Contact Links Tech Support team to confirm suitability for your Engine.PCLink...

RacePad is the ultimate CAN-bus steering wheel button panel designed to elevate your racing experience to the next level. With 4 rotary knobs and 8 easy-to-reach buttons, RacePad is the ideal addition to any race car, enabling both professional drivers and amateurs to fully customize their driving s...