Top Gear Cycles 34 views Claim this Business♡

This is a genuine Yamaha part. It is the plastic drive gear that transfers power from the electric motor, to the large steel drive gear.The gear comes with new lower support bearing and clutch bearing fitted. small steel gear is also included.NOTE: This drive gear assembly has a straight cut steel gear, please check this will fit your particular motor:Yamaha PW-XYamaha PW-X2

Please note: Any exchange of a battery will incur a $20 shipping fee to get the replacement battery sent out.

SRAM GX EAGLE AXS TRANSMISSION E-BIKE GROUPSETThe drivetrain embraced by core riders as the all-day best friend is now available in Transmission. The no-compromise, budget minded ethos remains built into the system but is modernized for a new generation of bikes. The GX Eagle Transmission derailleur...

This is a castellated tool to fit the Yamaha PW-X and PW-X2 and Giant SyncDrive Pro chainring spider nut / lockring nut. This tool has a 3/8″ socket drive for your ratchet or Torque wrench.If your motor has the 36mm normal looking nut, you will need the other Yamaha tool

4 in 1 press tool for Brose C, T, S and S-MagThis is a high quality stainless steel press tool, designed remove the chainring spider safely, without damaging the internal motor parts. (Puller not included).

Brose C, T, S and S-Mag lockring / spider nut toolThis is a castellated tool to fit all Brose chainring spider nut / lockring nuts. The tool has a 3/8″ socket drive for your ratchet or Torque wrench.

Kit contains all the bearings and O-rings required to overhaul the crankshaft and replace the outer bearings of the Yamaha PW-ST, TE & CE motors.

Yamaha 36mm lockring toolThis tool has been specifically manufactured to fit between the spider and the 36mm nut that holds the front chainring spider on the Yamaha motor.It has a 3/8″ socket drive for your ratchet or Torque wrench.Tool will not fit Yamaha PW-X, X2 or X3 see here: PW-X ToolNOTE: T...

High precision 0.2Nm torque driver for Brose drive belt tension"We have sourced a high quality, German manufactured 0.2Nm torque driver to set the drive belt tension of the Brose motor. The torque bit will tighten the belt tensioner screw to exactly 0.2Nm and then it will start clicking and will not let you overtighten the screw."This tool will fit ALL Brose motors.Does not include 3mm allen bit.

Kit includes every bearing required for the Brose crankshaft assembly and includes our internal protection seal, right hand crankshaft bearing seal, sprag bearing grease and gaskets.Please note: This kit fits the black magnesium 2.1 & 2.2 motors. These are also known as the S-Mag.

Kit contains all the bearings and O-rings required to overhaul the crankshaft and replace the outer bearings of the Yamaha PW and PW-SE motor.

BOSCH - LOCKRING TOOL

PRAXIS - BOSCH/YAMAHA E-BIKE CRANKSThese carbon e-cranks are compatible with the following:- BOSCH Gen2/4 " Performance Line" motor with ISIS spindle- Yamaha PW-X motors with ISIS spindle- Giant SyncDrive Pro by Yamaha motors with ISIS spindle- L & R Carbon Arms 165 / 170 / 172.5 / 175- MTN or road ...

PRAXIS - ALLOY HD E-BIKE CRANKSGreat aluminium forged options that are compatible with many e-Bike motors such as Bosch, Yamaha, Brose, Fazua and versions for Specialized ISIS motors.- Alloy e-Cranks- Cold forged aluminium- Heavy Duty "HD" ISIS set – 160/165mm- New HD Heavy Duty version for aggres...

PRAXIS - M30 E-BIKE CRANKSFor Specialized eBikes with "SL 1.1" motor with Praxis M30 spindle/spline. ROAD version for the Creo SL family of e-Bikes. MTN version for the Levo SL family of e-Bikes.- For Specialized e-Bikes with "SL 1.1" motor using Praxis M30 spindle/spline- Road Version -170/172.5/17...

This crankshaft will fit Brose C, T, TF, S & S-Mag 2.1 & 2.2.The crankshaft bearing surface is a critical part of the motors overall reliability, motor noise and bearing life. The crankshaft has two important bearing surfaces. The needle roller bearing surface and the sprag clutch bearing surface. I...

This bearing supports the left hand side of the Bosch Gen 4 crankshaft. It will fit the Gen 4 Performance Line CX, Cargo and Speed motors.Bosch Generation 4 motor BDU4xx.

BOSCH - POWERTUBE BATTERIESThe PowerTubes 400, 500 and 625 are fully integrated into the bike frame and can be installed almost invisibly in a wide variety of bike frame types. Meeting the highest demands in terms of performance and aesthetics: Bosch PowerTubes have the power to drive any ride and t...

This is the bearing that supports the right hand (drive side) of the Bosch Gen 4 crankshaft. It will fit the Gen 4 Performance Line CX, Cargo and Speed motors.Bosch Generation 4 motor BDU4xx.

Yamaha PW-X left-hand crankshaft bearing fitted with high quality LL seals.

Yamaha PW-X right-hand crankshaft bearing with high quality LL seals.This is the right-hand crankshaft bearing, situated on the large main drive gear and seated within the right-hand motor cover.