Vinny Fab 120 views Claim this Business♡

DASH OVERVIEW Take full control of your vehicle's data with the Haltech uC-10 Display Dash. Featuring a crisp, clear, and full-colour screen, the uC-10 display is now fully customisable using Haltech's powerful and intuitive NSP software. Allowing you to design your own screen layouts, arrange gauge...

Everything you require to add a reverse / back-up camera to your vehicle. Compatiable with Haltech uC-10 display dash for use with the camera input function. Requires uC-10 firmware version v2.29.x or later. Camera - CVBS, 720 x 480, 170 degree viewing angle, IP67 with fitted grommet and optional gu...

Used to connect supported Haltech CAN devices to the DTM-2 CAN connector found on Fueltech FT550 Lite, FT550, FT600, FT700 and FT700 Plus ECUs or harness kits like the LS550 V8, PRO550 Gen II V8, and PRO600 Gen III V8 complete harnesses.

Used to connect supported Haltech CAN devices to the CAN connector found on Holley Terminator, Terminator X, and Dominator ECUs.

DASH OVERVIEW With a crisp, clear and full colour display, the all new Haltech iC-7 Display Dash lets you see things in a brand new way. Designed and manufactured in Australia with motoring enthusiasts in mind, the iC-7 offers market-leading features in a unique, state-of-the-art package. Featuring...

DASH OVERVIEW With a crisp, clear and full colour display, the all new Haltech iC-7 Display Dash lets you see things in a brand new way. Designed and manufactured in Australia with motoring enthusiasts in mind, the iC-7 offers market-leading features in a unique, state-of-the-art package. Featuring...

Quick and easy installation of the Haltech iC-7 dash into a Non-EFI VehicleSuits: Haltech iC-7 Display Dash HT-010001 - iC-7Sensor PackIncludes: 1 x Semi Terminated Harness for iC-7 2 x 3mm ID Ring Terminals 2 x 4mm ID Ring Terminals 10 x 100mm Cable TiesNotes: Use with HT-010001 - iC-7 Sensor Pack

Used to connect supported Haltech CAN devices to the DTM-2 CAN connector found on Fueltech FT550 Lite, FT550, FT600, FT700 and FT700 Plus ECUs or harness kits like the LS550 V8, PRO550 Gen II V8, and PRO600 Gen III V8 complete harnesses.

Suits: Haltech iC-7 Dash, WB1, WB2 and Link Wire-in ECUs (Storm, Extreme, Fury, Thunder, Force GDI)Includes: 1 x CAN Adaptor Loom (DTM-4 to 6-pin Circular Connector)Notes: Suits Dual-Connector Link ECUs Wiring of input power required

Suits: Haltech iC-7 Dash, WB1, WB2 and Link Wire-in ECUs (Storm, Extreme, Fury, Thunder, Force GDI)Includes: 1 x CAN Adaptor Loom (DTM-4 to 6-pin Circular Connector)Notes: Suits Dual-Connector Link ECUs Wiring of input power required

Haltech's new Multi-function CAN Gauge displays real-time data from your Haltech ECU. Easily customize your gaugeART CAN Gauge to display the data you want to see with the included gaugeART CAN Gauge App (requires Android 4.4 or later or Apple iOS 9.1 or later). The easy to use app on your smartphon...

Suits: Haltech iC-7 Display DashIncludes: 1 x - BlackNotes: Suits Haltech IC-7 Display Dash Panel is textured. Made from UV stabilised ABS Plastic

The NEXUS PD16 is Haltech's new power distribution product. Boasting new, innovative yet user-friendly technology, it sets a new market standard for power distribution systems. Designed to integrate seamlessly into your existing Haltech Elite or Nexus engine management system, the PD16 ensures safe...

Please take care when wiring this sensor as incorrect wiring will damage this sensor! All "TI " MAP and Pressure sensors are individually electronically tested before packaging and are sold "as is" and without any further warranty. of opened sensors are not accepted. If you do not accept these terms...

Superseal connector - 34 Pin (Key 3) Plug and Pins Plug and pins only - Male Deutsch DTP-06-4S - Black connector (25Amp) The NEXUS PD16 is Haltech's new power distribution product. Boasting new, innovative yet user-friendly technology, it sets a new market standard for power distribution systems. De...

Quick and easy installation of the Haltech iC-7 dash into a Non-EFI VehicleSuits: Haltech iC-7 Display Dash HT-010001 - iC-7Sensor PackIncludes: 1 x Semi Terminated Harness for iC-7 2 x 3mm ID Ring Terminals 2 x 4mm ID Ring Terminals 10 x 100mm Cable TiesNotes: Use with HT-010001 - iC-7 Sensor PackR...

Terminated harness suits LSx engines with DBW, and incorporates PDM functionality. - EV6 primary injector plugs.- Plug and play with the OEM Ignition sub-harness on the engine. (Required) Includes: - 1 x HT-186205 Terminated Harness- 1 x Pack of DTM/DT connector and pin set to terminate to sensors...

Suits: Nexus R3 VCU Nexus S3 ECU Nexus S2 ECUIncludes: - 1 x Mounting Plate- 2 x 41.275mm (1.625") Tube ClampsNotes: Brackets are made from CNC machined 6061 Aluminum and then anodized for a durable black finish.

Haltech's Nexus S2 is the successor to the acclaimed Elite 1500, offering a serious upgrade in performance and functionality. The S2 combines all the classic of the Elite 1500 with new features and the superior processing power of the successful Nexus platform. - 4 x peak/hold injector drivers (can...

Ideal for modified street cars, engine swaps and custom wiring jobs. The Universal Wire-in Harness has a set of ECU connectors at one end and unterminated wires at the other. All the wires at the unterminated end are colour coded and clearly labelled. Connect your Haltech ECU to the terminated end a...

Haltech's Nexus S2 is the successor to the acclaimed Elite 1500, offering a serious upgrade in performance and functionality. The S2 combines all the classic of the Elite 1500 with new features and the superior processing power of the successful Nexus platform. - 4 x peak/hold injector drivers (can...

Ideal for modified street cars, engine swaps and custom wiring jobs. The Universal Wire-in Harness has a set of ECU connectors at one end and unterminated wires at the other. All the wires at the unterminated end are colour coded and clearly labelled. Connect your Haltech ECU to the terminated end a...

Haltech's Nexus S3 is the successor to the acclaimed Elite 2500, offering a serious upgrade in performance and functionality. The S3 combines all the classic of the Elite 2500 with new features and the superior processing power of the successful Nexus platform. - 8 x peak/hold injector drivers (can...

Haltech's Nexus S3 is the successor to the acclaimed Elite 2500, offering a serious upgrade in performance and functionality. The S3 combines all the classic of the Elite 2500 with new features and the superior processing power of the successful Nexus platform. - 8 x peak/hold injector drivers (can...