Williams Warn 27 views   1 clicks ♡

Connects 3/8" tube to 1/4" BSP (female) thread. This fitting has an O-ring in the flange to seal against the fitting it is screwed into so doesn't require thread tape or sealant, provided the surface that it screws up to is smooth and even.

Price is "per metre" and will be cut to a single length based on quantity required.

Reducer Connector 3/8" x 5/16" suitable for reducing tubing from 3/8" O.D (outer diameter) to 5/16" O.D.

4mm tube is great for beer lines as it restricts flow and therefore foaming as well. By using a smaller diameter tube you can shorten your beer lines in your Kegerator down to about 1 metre. Price is per metre and will be cut to a single length based on quantity required.

This elbow fitting allows you to connect 5/16" or 8mm PE tube to 5/16" or 8mm stainless steel tube.

Pushes into a 5/16" or 8mm Push-Fit fitting to reduce from 5/16" (8mm) to 1/4".

8mm or 5/16" tube to 4mm tube straight connector, great for necking down beer lines to prevent foaming.

8mm is a great tube size as it is the same outside diameter as 5/16" so when using 8mm or 5/16" diameter fittings, it allows you to change from metric to imperial sizes and easily change tube diameters by using reducing tube fittings or stem reducers.Price is "per metre" and will be cut to a single...

Pushes into an 8mm or 5/16" fitting to reduce 8mm or 5/16" tube down to 4mm tube. These are great for necking down beer lines to reduce tube required and prevent foaming.

Y divider suitable for splitting one 1/4" tube onto two lines. Perfect for adding an additional Gas Dispense Line from your regulator.

Tee connector for connecting 3 tubes or splitting one 1/4" tube into two lines

Female Adaptor 3/8" Tube x 1/4" NPTF.Push fit connector for connecting 3/8" tube to the back of a pressure gauge or any NPT/BSP male thread.

Female Adaptor 5/16" Tube x 5/8" BSP.This fitting screws to the back of a standard beer tap shank and allows 5/16" or 8mm tube to be connected to it, great for DIY situations where you want to connect to the shank that is installed through a fridge door or similar.

Reducer Connector 3/8" x 1/4".Reducer Connector 3/8" x 1/4" suitable for reducing tubing from 3/8" O.D (outer diameter) to 1/4" O.D.

1/4"" Tube to 1/4" BSP Straight Adaptor.Connects 1/4" tube to 1/4" BSP (female) thread, this fitting has an O-ring in the flange to seal against the fitting it is screwed into so doesn't require thread tape or sealant provided the surface that it screws up to is smooth and even

Straight Adaptor 1/4" Tube to 1/4" BSPT.Connects 1/4" tube to a 1/4" BSP (female) fitting. You will need thread tape or thread sealant to seal the threaded connection.

Superseal Straight Connector 3/8" x 3/8" Speedfit.This connector allows you to connect 3/8" tube to a 3/8" stainless steel tube.

Female Adaptor 8MM x 1/4" BSP.Connects 8mm or 5/16" tube to 1/4" BSP (male) thread

Connector for joining 5/16" or 8mm OD tube.

Reducer Connector 5/16" x 1/4".Reducer Connector 5/16" x 1/4" suitable for reducing tubing from 5/16" tube to 1/4" tube.