FPP Speed Shop 458 views Claim this Business♡

Quickcar NACA DuctNACA duct Ideal for ducting air into the car from side windows or surfaces that would normally not have any air inlet. Provides airflow through the car to cool the driver or the rear-end cooler.

Quickcar Bumper DuctOverheated brakes cannot perform properly. These bumper ducts will direct cool air to critical parts that need cooling and will also prolong brake life. Durable and easy to install.Air or Brake Duct, Bumper Mount, Single 3 in Tube, Molded Plastic, Black, Each

QuickCar's roll bar padding uses closed-cell foam that gains density as it is compressed to absorb impact and help in preventing injury. Offset I.D. mounting tube in padding allows thicker padding to face the driver. Sold as 36" pieces of padding.

Aeroflow roll bar padding is made from high density core cell foam and is its perfect for wrapping roll cages and bars. The inside diameter is off-set by 11mm (7/16") to provide extra thickness and absorption. When rotated toward the pessengers it provides extra protection. This padding is NOT SFI approved. Suits bar sizes 41.3mm (1-5/8") and 47.6mm (1-7/8"). Comes in 914mm (3ft) lengths.

Black SFI 45.1 compliant roll bar padding is a more compact and lighter alternative to standard high density padding. Simply peel the paper off of the back of the padding and stick it to a roll bar measuring from 1-1/4 through 1-3/4 with the thick side facing the driver. Sold individually as a 36" stick.

Suits Small Block and Big Block Chevy (V8 1955 to 1986).Accepts GM Thermostat.The Aeroflow Performance billet thermostat housings are a three-piece design that allows for correct positioning of the outlet to suit a large array for applications especially in conversions where small can be an issue. M...

These 45 degree swivel thermostat is designed to suit small block Ford 289, 302 and 351 Windsor V8. Aeroflow Performance billet thermostat housings are a three-piece design that allows for correct positioning of the outlet to suit a large array for applications especially in conversions where size c...

Aeroflow Performance now offer a swivel thermostat housing for the FG Ford Falcon 6cyl engine. This new thermostat housing will also fit earlier model 6cyl engines inc EF, EL, AU, BA, & BF and has the option to remove the heater hose barb and plug with a AF813-04. This handy thermostat housing is pe...

Water Neck Spacer.Aeroflow's Chevy water neck spacer kit is the perfect solution for allowing an extra auxiliary port of coolant and can be used for many applications including plumbing coolant to a turbocharger , extra coolant flow from rear of heads or simply connecting your heater in a conversion...

- 3-PIECE CONSTRUCTION- ALUMINUM BODY SERIES- HARD ANODIZED RED- BLACK ANODIZE AVAILABLE ON SELECT SIZES

- 3-PIECE CONSTRUCTION- ALUMINUM BODY SERIES- HARD ANODIZED RED- BLACK ANODIZE AVAILABLE ON SELECT SIZES

- 3-PIECE CONSTRUCTION- ALUMINUM BODY SERIES- HARD ANODIZED RED- BLACK ANODIZE AVAILABLE ON SELECT SIZES

Aeroflow Intercooler Aluminium Pipe Clamps are made from billet 6061-T6 lightweight aluminium. It features a double O-ring grooved sleeve offering absolute sealing with maximum flexibility, so you never have to worry about blowing a pipe off again! Easy bolt together quick release design outer ring ...

Aeroflow's universal flexible turbo drains are designed to help you quickly and eaisly plumb up your turbo drain. Featuring -10 or -12 female swivel nuts at both ends they are easily mated to our turbo drains and block and sump fittings. Made from 304 stainless steel to protect them from turbo manifold heat.

Aeroflow Performances Bellmouth-style velocity stacks are ideal for achieving maximum air velocity. Manufactured out of spun aluminium, these lightweight Bellmouth velocity stacks increase the volume or air at your compressor inlet. They come in polished and black anodized so they look awesome under...

Recommended horsepower rating: 300-550HPRecommended engine displacement: 1.4L to 3.0L- V-Band turbine inlet and outlet- Dual ceramic ball bearing- Point Milled 7075 billet compressor wheel- Ported shroud compressor housing cover- Speed sensor port included in compressor cover (Speed sensor sold sepa...

BOOSTED 5862 Turbocharger SpecificationsRecommended horsepower rating: 400-750HPRecommended engine displacement: 2.0L to 4.5L- Dual ceramic ball bearing- Point Milled 7075 billet compressor wheel- Ported shroud compressor cover- Speed sensor port included in compressor cover (Speed sensor sold separ...

Aeroflow Performance Boosted turbochargers are designed specifically for the enthusiast who wants optimal performance at a competitive price. Boosted Turbochargers have a range of specific turbos to meet your power goals, driving style and budget. Boosted turbocharger's utilise billet compressor whe...

The Aeroflow intercoolers are designed with a tube and fin core which has the highest thermodynamic dissipative process. Aeroflow new tube and fin style intercoolers are available in both polished and black powder coated. These universal intercoolers are available in the popular 280x300, 450x300, 600x300 and 450x300mm sizes. All intercoolers come with a 3" inlet and outlet.

Aeroflow Performance turbo oil feed adapter. This turbo oil feed plate bolts to the top of a turbocharger to provide oil supply to the turbocharger core. This does not have an internal restrictor built into the fitting and if using our Boosted range of turbocharger will require an external oil restrictor fitted.

Perfect for use with Aeroflow oil coolers, this Billet Aluminium remote filter head and thermostat combines the engine oil filter and oil thermostat in one convenient unit. This is great for those wanting to remove extra lines and fittings required to run the thermostat in an separate location and f...

Aeroflow Performance 12-volt electric oil pump is designed to handle the toughest automotive racing environments for transmission / gear oil fluid cooling or scavenge systems on your turbo drain back systems. The internals feature a hardened bronze spur gear & rotors so there are no diaphragms to fa...

Alternator Brackets.These alternator brackets are made from 6061 T6 billet aluminium and are designed to suit Small Block Ford Windsor 289-302 V8s with a Standard Mounted alternator on the right hand side (Australian Drivers Side) of the motor and the right hand side radiator Water pump hose.Available in Polished or Black Finish.

Billet Alternator Bracket.This Billet Alternator bracket suits GM LS engines with a VT-VZ Commodore belt line. It also suits the factory style alternator and places the alternator in the factory position.Available in Polished or Black Finish.