Ies Technologies Claim this Business♡

sFeatures:- Made from galvanized steel- 30mm x 3mm 80-300mm⌀, 50mm x 3mm >300mm⌀- Can be used to mount a duct horizontally or vertically- supplied with m8 bolts x 2 and an extended 8mm nut to allow suspension using a single 8mm threaded rod

IES Technologies RV300 Rotary Valve Rebuild KitCompatible Model: IES RV300 Rotary ValveContents: Replacement Rubber Blades and Inner Sleeve OnlyMaterial Options:Natural Insertion Rubber Neoprene Rubber The IES Technologies RV300 Rotary Valve Rebuild Kit is designed to extend the life and restore the...

IES Technologies RV-HC500 Rotary Valve Rebuild KitCompatible Model: IES RV-HC500 Rotary ValveContents: Replacement Rubber Blades OnlyMaterial Options:Natural Insertion Rubber Neoprene Rubber The IES Technologies RV-HC500 Rotary Valve Rebuild Kit is designed to extend the life and restore the sealing...

IES Technologies RV-HC960 Rotary Valve Rebuild KitCompatible Model: IES RV-HC960 Rotary ValveContents: Replacement Rubber Blades OnlyMaterial Options:Natural Insertion Rubber Neoprene Rubber The IES Technologies RV-HC960 Rotary Valve Rebuild Kit is designed to extend the life and restore the sealing...

IES Technologies APJ / RJC Filter Sock – Anti-StaticMaterial: Needlefelt PE500g/m²Coatings: Anti-static with dual-layer bottom wear cuffEngineered for performance, durability, and safety, the IES Technologies APJ / RJC Filter Sock – Anti-Static is specifically designed for use in IES RJC Series...

IES Technologies Cartridge Filter – Polyester Spunbonded 260g/m² with PTFE MembraneMaterial: Polyester Spunbonded 260g/m² with PTFE MembraneFilter Area: 11 m²Dimensions: OD 324 mm × ID 213 mm × Height 660 mmMounting: 6 × M8 × 28 mm studs, PCD 260 mmThe IES Technologies Cartridge Filter comb...

IES Technologies DD Filter SockMaterial: Polyester Needlefelt, 500g/m²Coating: Embedded Anti-Static PropertiesThe IES Technologies DD Filter Sock is a durable and safety-focused filtration solution engineered specifically for use with the IES DD Series dust collectors. Made from high-quality polyes...

IES Technologies RAC Filter Sock – Seamless WovenMaterial: Seamless Woven FabricConstruction: Flexible, Stretch-Fit Design with Superior Dust ReleaseThe IES Technologies RAC Filter Sock – Seamless Woven is purpose-built for the IES RAC Series dust collectors, offering a specialized solution for...

IES Technologies Cartridge Filter – Polyester Spunbonded with AL Coating (Anti-Static)Material: Polyester Spunbonded with AL CoatingFilter Area: 9.4 m²Dimensions: OD 324 mm × ID 213 mm × Height 660 mm Available Types:Type 1: Open/Open Type 2: Open/Closed The IES Technologies Cartridge Filter â€...

EcoLoc RingsFeatures:- An economical way to connect steel ducts & Fittings together- 80-400mm⌀ range- Ridged & strong connection- Manufactured from plated steel for corrosion resistance- Suitable for indoor and outdoor use- Reusable allowing for easy duct system reconfigurations

Floor SweepFeatures:- Used to suck away floor sweepings into an extraction system- Manufactured from 1.6 & 2.0mm thick galvanised steel sheet- Heavy duty construction & hinge for long term durability- Laser cut parts, laser welded together for high quality- integrated hold down points

sFeatures:- Manufactured from 1.0mm thick galvanized steel sheet- Stocked up to 600mm⌀. Larger sizes available on request- Ensures 'unimpeded vertical discharge' as required by most local authorities for compliance with discharge to atmosphere regulations- internal cone drains water through integr...

sFeatures:- Manufactures from 1.00mm thick galvanized steel sheet- Stocked up to 600mm ⌀. Larger sizes available on request- Laser cut bird stop mesh- Prevents water ingress into a vertical discharge stack

IES TechnologiesDiameter Range: Ø80–450 mmMaterial: Galvanized SteelThe IES Technologies designed to effectively remove large wood chips and other coarse particles from ventilation airstreams. Installed within ducting systems, it utilizes internal deflectors to redirect heavier debris downward in...

sFeatures:- laser cut from galvanized sheet (3mm) and mild steel (5mm)- s are made to suit our standard dimensions and match in our range i.e. fans and duct collectors- Electro-galvanized finish for corrosion protection- Other PCD and flange dimensions available on request

Nitrile GasketsFeatures:- Used as a sealing alternative to silicone sealer or foam tape in flanged connections- Made from 3mm nitrile rubber. A good sealing option for oil mist extraction systems- sized to match our standard flanges- Other PCD and flange dimensions available on request

sFeatures:- Manufactured from 1.6mm galvanized high tensile steel- QuickLoc edge matches our duct, bends, fittings & clamp ranges- Can be welded to a hopper/machine to allow a duct to be connected

sFeatures:- Manufactured from galvanized high tensile steel. 0.75mm thick 80-300mm⌀, 0.95mm for >300mm⌀- Allows connection of flexible duct to steel duct- Specially sized to fit EASILY into our flexible duct range- Rolled swage to stop flex slipping off the spigot

sFeatures:- Manufactured from 1.0mm & 1.6mm galvanized steel- Pressed & spot-welded construction- Used to modulate airflow in a duct - not suited for shutting off airflow in a duct (use slide dampers to shut-off airflow in ducts)- QuickLoc edges match our duct, bends, fittings & clamp ranges- Ex-sto...

EPDM Foam TapeFeatures:- 20mm wide x 3mm thick EPDM- Closed cell for air and water tightness- Sold per m (min order quantity 5m)- Self-adhesive backing with scrim reinforcement- Excellent alternative to silicone sealer for between flanges, especially if you need to be able to take the flanges apart...

Features:- M8 x 20 and M10 x 25 zinc plated- Sold in boxes of 50- Zinc plated for corrosion resistance- Bolt and nut included- Fully threaded, 8.8 high tensile- Use with our flanged connections

Galvanized Wire Suspension RopeFeatures:- 3mm⌀ Galvanized steel wire rope- 7x 19 multi-core, minimum breaking load 0.59t- Use with our cable locks for an adjustable suspension solution- A quick & economical solution for the suspension of a duct system from overhead structures- Available per m, 25m...

sFeatures:- Seismically rated for use with 3.0 - 5.0mm⌀ wire- Max load range per wire lock is 291kg. Safety factor for 5:1- Constructed from a combination of sintered & stainless steel for corrosion resistance- Lock and release pin allows for easy adjustment of suspension wire length so that the d...

sFeatures:- An easy way to connect threaded rods to steel beams- Cast iron, electro-galvanised finish of corrosion protection- Constructed from a combination of sintered & stainless steel for corrosion resistance