Maxfab Fabrication And Supply Co 53 views ♡

The Multiple Award-winning Kompact EM Series of Upgraded Diverter Valves are the world’s first truly plug and play Upgrade solution for your factory diverter valve. Unplug and unbolt your OEM Valve, and install a Kompact EM Valve in its place. No adaptors, hoses or extra assembly is required.The K...

Solid Boss- M6 19mm OD x 14mm High- M8 23mm OD x 15mm HighThese are great to weld on the outside of tanks, radiators and intercoolers for mounting, the hole goes right thruBlind Boss- M8 Blind Boss - 13mm OD x 20mm Long the head is 22x3mmThe bottom of these are undrilled / sealed making these bosses...

Exhaust manifold flange for 1JZ-GTE NON-VVTILaser cut 12mm mild or stainless steel (SS304)Commonly used to build headers and turbo manifoldsMild steel flanges can be used with stainless tube they don't tend to warp and move as much during use compared to stainlessWhist we make every effort to keep w...

The RacePort EM is a High Flowing Valve capable of supporting over 2500HP with built in solenoid for advanced control strategies and OE level vehicle integration, where electronic diverter valves are fitted. The RacePort EM (electro-mechanical) is a motorsport quality, high flowing diaphragm operate...

Turbosmart Upgraded Wastegate Actuators have been developed to provide the maximum possible boost response for your factory frame turbocharger. The Turbosmart IWG75 Series of upgraded Actuators benefit from an increased 'Working Ratio' over the factory equipment resulting in improved boost response...

The GenV PowerGate60 Compressed Gas external wastegate is a cost-effective, high performing 60mm external wastegate designed for control strategies that actively bias the top chamber with increased pressure for large boost bandwidth operation, such as CO2 drag racing or compressed air applications...

The GenV CompGate40 Compressed Gas external wastegate is a cost-effective, high performing 40mm external wastegate designed for control strategies that actively bias the top chamber with increased pressure for large boost bandwidth operation, such as CO2 drag racing or compressed air applications. T...

The Kompact Dual Port Blow Off Valve Set to suit the Nissan Skyline GT-R series, including R32, R33, and R34 (RB26DETT), has been designed to improve boost response and eliminate compressor surge, enhancing the efficiency and longevity of the GT-R's factory turbochargers, while providing that high-p...

exhaust manifold flange pair.Laser cut 10mm mild steel or stainless steel (SS304).45mm port.Commonly used to build headers and turbo manifolds.Whist we make every effort to keep what we have listed in stock, in some cases we may need to have it cut which can be a 3-5 day lead timeWe have hundreds of...

Nissan T28 GTR outlet flangeAvailable in mild steel2" centre hole, 5 BoltLaser cutWe have hundreds of different flange models on file, if we don't already have it listed just ask and we can have it made

High performance multi layered Silicone hose. Constant temp resistant from -50 to 170 degrees Celsius (-60 to 340 degrees Fahrenheit) and pressure rated to 220PSI with a 5mm wall thickness.

High performance multi layered Silicone hose. Constant temp resistant from -50 to 170 degrees Celsius (-60 to 340 degrees Fahrenheit) and pressure rated to 220PSI with a 5mm wall thickness.

Spring base boost pressure:3 PSISpring location:InnerFits following Turbosmart Wastegates with 74mm screw collar capTurbosmart 38mm Ultra-Gate38 WG38Turbosmart 40mm Comp-Gate40 WG40Turbosmart 45mm Hyper-Gate45 WG45Turbosmart 50mm Pro-Gate50 Lite WG50 (will not fit 6 bolt versions)Fits following Turb...

Green Brothers high strength 1st/2nd gear fork and 3rd/4th gear forkCNC machined from 7075 T6 aluminiumExtra pad at the top of each fork for added supportDirect bolt in replacement for the factory cast alloy items. No modification neededSuits all alloy case 'Supra style' gear boxes- W55, W56, W57, W...

Exhaust Flange to suit Holden 253, 304 and 308 enginesLaser cut 10mm Stainless Steel (SS304). Sold as a pairPort sizes 36x41Whist we make every effort to keep what we have listed in stock, in some cases we may need to have it cut which can be a 3-5 day lead timeWe have hundreds of different flange m...

Aeroflow Performance aluminium fuel lines are lightweight and extruded from one seamless thin wall tube. This affordable aluminium fuel/oil line is easy to install on most systems and is ideal for routing lines along the chassis, frame rails or anywhere flexible line is not required. This aluminium...

3.0" Oval mufflerSS409 grade stainless350 x 235 x 105mm bodyPerforated inner tubeOffeset / Center - These can be installed in either direction i.e center in/offsetout, or offset in/center outThese are a lower grade stainless when compared to SS304, 409 has a lower chromium and nickle content, 409 st...

Billet intake manifold flanges to suit Subaru EZ30 engines, sold as a pairDesigned and tested in houseSuits factory rubber oring mounting gasket, ports have a tapered to round transition to suit 51mm or 2" aluminum tube and bendsCNC machined from 6061 aluminum, these are a raw machined finish as per...

Maxfab exhaust manifold flange to suit Toyota 1KZ engines commonly found in Hilux, hiace and prado'sLaser cut 12mm mild or stainless steel (SS304)Commonly used to build headers and turbo manifoldsMild steel flanges can be used with stainless tube as they don't tend to warp and move as much during us...

1x Brand new FC peripheral port rotor housing. This is Green Brothers economy series housing for those who want to do their own porting. All product development, testing and CNC machine work is proudly done in-house at their Mount Maunganui facility using high quality materials- CNC machined periphe...

Green Brothers brand new FC peripheral port rotor housing is ready to run, no finishing required. All product development, testing and CNC machine work is proudly done in house at their Mount Maunganui facility using high quality materials and equipmentWhat's included:- CNC Peripheral porting - choi...

Mazda BT50 EGR blanking plate pair, 3mm SS304, twice the thickness of others for better sealing and longevitySuited for:- Mazda BT50 from late 2011 to 2015 with 2.2L 4cyl & 3.2L 5cyl engines- Ford PX1 -PX2 Ranger

Subaru APD (air pump delete) blanking plates made from 3mm SS304, twice the thickness of others for better sealing and longevitySuits 2005 Subaru's

The all-new addition to the Turbosmart line-up is the fresh air ALV40 (Anti-Lag Valve) for motorsport applications. Featuring a 40mm valve diameter and a purpose-designed actuator housing. Multiple fittings are also supplied for ease of fitment and fabricationThe fresh air valve allows for incoming...