Monitor Pro ♡

Certificate Includes NIST-Traceable calibration certificate

- For use with BLUETHERM® ONE- Response time less than two seconds- accuracy (type K) ±0.5°C, 0°C to 100°C- accuracy (type T) ±0.2 °C, -20 °C to 70 °C- Probe dimensions Ø3.3 x 120 mm- Reduced tip dimensions Ø1.8 x 25 mm- Designed for use with the 323-950 probe handleFast response thermoco...

The new Thermapen Blue combines the latest Bluetooth® wireless technology with the same high accuracy, precision, and speed as delivered by the SuperFast Thermapen. Simply select your food item on the SafeFoodPro tablet, probe the item to be measured and press the button to securely transmit your t...

Protective Silicone Boots that are designed to protect your TempTest thermometer against accidental damage, knocks and scuffs.- protects against accidental damage- prevent cross contamination between food types- made from durable silicone- 6 colours availableThese boots are available in 6 colours:-...

The MP-WH2 LAN Hub is an ultra-low-power wireless receiver which uses the Lora protocol, giving good penetration and ultra-long-range connectivity.LAN cabled connections are available for internet connection.The MP-WH2 LAN Hub uses a 32-bit industrial processor which offers great high-speed data pro...

Pack includes:- 1 x MP - WH2 LAN Hub- 3 x MP - TS3 Temperature SensorsNOTE: To operate this device requires a Safe Food Pro software subscription

Certificate Includes NIST-Traceable calibration certificate

EVE ER18505 Lithium 3.6V BatteryTechnical Information:3.6V A 3.5Ah Lithium Thionyl Chloride Spiral ER18505M, EVE3.6 Primary lithium-thionyl chloride (Li-SOCI2) Spiral A size cell.High and stable operating voltage: 3.6V.Wide operating temperature range: -60˚C to 86˚C.

Should you use a ?A thermal buffer is a substance that a sensor probe tip is placed in, to slow down (buffer) the temperature fluctuations of the air in a fridge/freezer/warmer unit due to events such as doors being opened, or defrost/cleaning cycles. Typically, the tip of the sensor is placed into...

The MP-TS3 has been designed for ambient temperature detection with an LCD display and an isolator switch With a sensitive temperature response of ±0.5 °C and a wide temperature range of -40 to 125 °C (thermocouple) and -30°C - 60°C (sensor) it is the perfect sensor for fridge and freezer tempe...

Certificate Includes NIST-Traceable calibration certificateIR accuracy can be affected by the emissivity setting, target spot size, and rapid changes in ambient temperature. Accuracy specification based on an ambient temperature of 77°F ±2°F (25°C ±1°C).

The MP-WH3 4G LoRa Hub is an ultra-long-range wireless data acquisition gateway dedicated to receiving the signals from Safe Food Pro's LoRa-based temperature sensors.The LoRa Gateway communicates with the SafeFoodPro data server via 4G mobile data technology. It uses a high-performance 32-bit indus...

Thermocouple oven temperature probe is designed to measure the temperatures for hot holding and cooling.- Temperature range -75 to 250°C- Accuracy (type K) ±0.5°C, 0°C to 100°C- Accuracy (type T) ±0.2 °C, -20 °C to 70 °C- Ø3.3mm x 130mmFor use with MP-TL01 Temperature Logger

Thermocouple oven temperature probe is designed to measure the temperatures in ovens- Temperature range -75 to 250°C- Accuracy (type K) ±0.5°C, 0°C to 100°C- Accuracy (type T) ±0.2 °C, -20 °C to 70 °C- Ø3.3mm x 130mmFor use with MP-TL01 Temperature Logger

Temperature probe extension leadExtends reach up to additional 1000 or 2000mmFits any ETI K thermocouple probe Length: 1m or 2m

The Temperature Logger (MP-TL1) is the perfect temperature logger for monitoring the cooling and/or hot-holding of cooked foods, it can also, be used to remotely monitor the temperature of foods inside an oven, using the recommended ETI thermocouple probe with a handle. The MP-TL01 has an LCD displa...

The Temperature Logger (MP-TL1) is the perfect temperature logger for monitoring the cooling and/or hot-holding of cooked foods, it can also, be used to remotely monitor the temperature of foods inside an oven, using the recommended ETI thermocouple probe with a handle. The MP-TL01 has an LCD displa...

The Temperature Logger (MP-TL01) is the perfect temperature logger for monitoring the cooling and/or hot-holding of cooked foods, it can also, be used to remotely monitor the temperature of foods inside an oven or hot holding. The MP-TL01 has an LCD display that shows the temperature and status and...

Save $20!Should you use a Thermal Buffer?A thermal buffer is a substance that a sensor probe tip is placed in, to slow down (buffer) the temperature fluctuations of the air in a fridge/freezer/warmer unit due to events such as doors being opened, or defrost/cleaning cycles. Typically, the tip of the...

The Starter Pack includes:- 1 x MP - WH3 4G Hub- 3 x MP - TS3 Temperature Sensors4G FlexibilityThe MP-WH3 4G LoRa Hub is an ultra-long-range wireless data acquisition gateway dedicated to receiving the signals from Safe Food Pro's LoRa-based temperature sensors.The LoRa Gateway communicates with the...

24/7 Wireless Monitoring of 4 Fridges or FreezersThe Executive Pack includes:- 1 x MP - WH3 4G Hub- 4 x MP - TS3 Temperature Sensors- 4 x MP Thermal Buffers4G FlexibilityThe MP-WH3 4G LoRa Hub is an ultra-long-range wireless data acquisition gateway dedicated to receiving the signals from Safe Food...

24/7 Wireless Monitoring of 4 Fridges or FreezersThe Executive Pack includes:- 1 x MP - WH2 LAN Hub- 4 x MP - TS3 Temperature Sensors- 4 x MP Thermal BuffersLong Range ConnectivityThe MP-WH2 LAN Hub is an ultra-low-power wireless receiver which uses the Lora protocol, giving good penetration and ult...

The Cap Only for Bluetooth Thermometer