Skeleton Welding 42 views   2 clicks Claim this Business♡

PWR 55mm Standard Spec radiator coreUpgradable to a High Spec version2x Maradyne 14" 2130CFM fans (4260CFM total)Can supply with hose tails or AN fittingsM8 Female bosses on the side of the tanks12mm pins on the bottom of the radiator-4 Male bleed on top of tank-6 Speedflow ORB drain bungVery modula...

PWR 55mm Standard or High Spec coreMaradyne 16" 2170 CFM FanFan ShroudSmall filler neckHose tails or AN FittingsSpeedflow -6 ORB drain bung

PWR Universal Transmission Cooler Kits:Available sizes:280 x 110 x 19 - PWO0525-K - TC0676280 x 150 x 19 - PWO0526-K - TC0677280 x 200 x 19 - PWO0527-K - TC0678280 x 255 x 19 - PWO0528-K - TC0679Details:- 3/8" Male hose barbs on oil cooler1m of transmission hose & hose clampsUniversal fitment for ea...

Radiator, Intercooler and Oil Cooler Mount - M6 / M8Use this for mounting Radiators, Oil coolers, intercoolers where you want to give it some isolationSuits 20mm hole in 3 or 4mm sheet metal for grommet to press intoSold as a kit, 1x grommet, 1x Machined Insert6061 Machined aluminum insert allowing...

6" Aluminum Go Kart rims fitted with 6x M5 bead lock screws or blank with NO bead lock screws.These are 120mm ish inside the beads (where the tyre seats)I also sell these with single or double bead locks attached, please see my other listings

These are useful to stop your tires spinning on the rim during hard cornering or acceleration and are a bolt in solution for higher power karts, just fit your tire and go.These fit Carlisle branded tires with a thicker wall with some gap/bulging between the outer flange and the inner flange (as per...

Professionally manufactured tanks from Skeleton Welding designed to be mounted vertically to your rollover bar.Comes with:3/8" BSPT Ball valve3/8" BSPT 6.25 / 1/4" or 8mm / 5/16" brass hose tail90 degree 8mm hose tail for rollover/vent valve.Dimensions: 250mm High x 100mm deep x 100mm wide with a 3...

Included in this assembly:2x 12mm thick Inner weld rings2x 6mm thick Outer bolt on plates2x Replacement valve stems12x M6x20 Counter sunk boltsYou will need at minimum 1x of these assemblies to do single bead locks or 2x of these for dual bead locksRIMS ARE JUST FOR PHOTO PURPOSES, NONE ARE INCLUDED...

Sizing:1" / 25.4mm diameter - 27mm CLR - 77mm outside diameter of the donut.1.25" / 31.75mm diameter - 37mm CLR 106mm outside diameter of the donut.35mm diameter - 37mm CLR 111mm outside diameter of donut.1.5" / 38mm diameter - 38mm CLR - 102mm outside diameter of donut.2" / 50.4mm diameter - 46mm C...

CNC Machined Metric Aluminum Female Weld OnMachined from 6061 weldable grade Aluminum in New ZealandM6 x 16mm - 16mm OD, 16mm TallM8 x 16mm - 25mm OD, 16mm TallPerfect for welding onto your radiator, intercooler, oil cooler or fuel tank

Brand NEW Spun Aluminum dome end.Perfect for a washer bottle, overflow bottle, fuel tank or catch can.Sizes: 2.5" 3", 4", 5" and 6"2mm Wall thicknessSemi polished finishPerfect weldabilityAvailable in flat top radius edge and dome endManufactured in Australia by JNT Performance - Metal spinning spec...

Brand NEW VDO Aluminum CNC machined fuel sender flange.Designed to fit into a 2.5" / 63.5mm hole saw cut hole with blind m5 threads so no fuel vapor will bypass the sender.Has small center drill for flange orientation.Comes with 5x M5x12 Button Head Cap ScrewsWill fit VDO fuel senders utilizing 2 1...

Choose between the following brand NEW kits:10-180 Ohm - 220.003 - 10 Ohms empty to 180 Ohms full0-90 Ohm - 220.004 - 0 Ohms empty to 90 Ohms fullFully height adjustable between 150mm / 6" and 595mm / 24" with full instructionsSupplied with Neoprene GasketFull resistance output to suit VDO gauges an...

Choose from the following in the drop down list:Speedflow - 990-M10-1-D - M10 x 1.0 Aluminum Female Weld OnSpeedflow - 990-M12D - M12x1.5 Aluminum Female Weld OnSpeedflow - 990-M14D - M14x1.5 Aluminum Female Weld OnSpeedflow - 990-M16D - M16x1.5 Aluminum Female Weld On

Brand NEW -6AN Speedflow 990-06-D aluminum weld on ORB with Speed flow 814-06-BLK -6 black hex port plug- Fits into an aluminum radiator, oil cooler or fuel tank with a 22mm hole then tig welded- Uses 1/4" allen key to tighten / release.

Choose from the following:Speedflow 997-02-S 1/8" NPT Steel Female Weld OnSpeedflow 997-02-SS 1/8" NPT Stainless Steel Female Weld OnSpeedflow 997-02-D 1/8" NPT Aluminum Female Weld On alloySpeedflow 997-04-D 1/4" NPT Aluminum Female Weld On alloySpeedflow 997-06-D 3/8" NPT Aluminum Female Weld On a...

Ready to weld into your radiator, oil cooler or fuel tank.

Choose from the following:Speedflow 999-03-D - Aluminum -3 Male weld onSpeedflow 999-04-D - Aluminum -4 Male weld onSpeedflow 999-06-D - Aluminum -6 Male weld onSpeedflow 999-08-D - Aluminum -8 Male weld onSpeedflow 999-10-D - Aluminum -10 Male weld onSpeedflow 999-12-D - Aluminum -12 Male weld onSp...

Choose from the following:Speedflow 990-04D - -4 Female ORB Weld OnSpeedflow 990-06D - -6 Female ORB Weld OnSpeedflow 990-08D - -8 Female ORB Weld OnSpeedflow 990-10D - -10 Female ORB Weld OnSpeedflow 990-12D - -12 Female ORB Weld OnSpeedflow 990-16D - -16 Female ORB Weld OnSpeedflow 990-20D - -20 F...

Choose from the following on the drop down bar:Speedflow - 997-B02D - 1/8" BSPT Aluminum Weld OnSpeedflow - 997-B04D - 1/4" BSPT Aluminum Weld OnSpeedflow - 997-B06D - 3/8" BSPT Aluminum Weld OnSpeedflow - 997-B08D - 1/2" BSPT Aluminum Weld OnSpeedflow - 997-B12D - 3/4" BSPT Aluminum Weld OnReady to...

Speedflow - 989-505 - 8mm / 5/16" Aluminum Weld On TailSpeedflow - 989-506 - 10mm / 3/8" Aluminum Weld On TailSpeedflow - 989-508 - 12.7mm / 1/2" Aluminum Weld On Tail

Speedflow - 814-M10-01-BLK - M10 x 1 - Metric Port PlugSpeedflow - 814-M10-02-BLK - M10 x 1.25 - Metric Port PlugSpeedflow - 814-M12-02-BLK - M12 x 1.25 - Metric Port PlugSpeedflow - 814-M12-BLK - M12 x 1.5 - Metric Port PlugSpeedflow - 814-M16-BLK - M16 x 1.5 - Metric Port PlugSpeedflow - 814-M18-B...

Speedflow - 989-M18-SS - M18 Female Oxygen Weld On - Stainless Steel