Skeleton Welding 42 views   2 clicks Claim this Business♡

6" Aluminum Go Kart rims fitted with 6x M5 bead lock screws or blank with NO bead lock screws.These are 120mm ish inside the beads (where the tyre seats)I also sell these with single or double bead locks attached, please see my other listings

These are useful to stop your tires spinning on the rim during hard cornering or acceleration and are a bolt in solution for higher power karts, just fit your tire and go.These fit Carlisle branded tires with a thicker wall with some gap/bulging between the outer flange and the inner flange (as per ...

Professionally manufactured tanks from Skeleton Welding designed to be mounted vertically to your rollover bar.Comes with:3/8" BSPT Ball valve3/8" BSPT 6.25 / 1/4" or 8mm / 5/16" brass hose tail90 degree 8mm hose tail for rollover/vent valve.Dimensions: 250mm High x 100mm deep x 100mm wide with a 3/...

Included in this assembly:2x 12mm thick Inner weld rings2x 6mm thick Outer bolt on plates2x Replacement valve stems12x M6x20 Counter sunk boltsYou will need at minimum 1x of these assemblies to do single bead locks or 2x of these for dual bead locksRIMS ARE JUST FOR PHOTO PURPOSES, NONE ARE INCLUDED...

Sizing:1" / 25.4mm diameter - 27mm CLR - 77mm outside diameter of the donut.1.25" / 31.75mm diameter - 37mm CLR 106mm outside diameter of the donut.35mm diameter - 37mm CLR 111mm outside diameter of donut.1.5" / 38mm diameter - 38mm CLR - 102mm outside diameter of donut.2" / 50.4mm diameter - 46mm C...

CNC Machined Metric Aluminum Female Weld OnMachined from 6061 weldable grade Aluminum in New ZealandM6 x 16mm - 16mm OD, 16mm TallM8 x 16mm - 25mm OD, 16mm TallPerfect for welding onto your radiator, intercooler, oil cooler or fuel tank

Brand NEW Spun Aluminum dome end.Perfect for a washer bottle, overflow bottle, fuel tank or catch can.Sizes: 2.5" 3", 4", 5" and 6"2mm Wall thicknessSemi polished finishPerfect weldabilityAvailable in flat top radius edge and dome endManufactured in Australia by JNT Performance - Metal spinning specialists, NOT made in China

Brand NEW VDO Aluminum CNC machined fuel sender flange.Designed to fit into a 2.5" / 63.5mm hole saw cut hole with blind m5 threads so no fuel vapor will bypass the sender.Has small center drill for flange orientation.Comes with 5x M5x12 Button Head Cap ScrewsWill fit VDO fuel senders utilizing 2 1/...

Choose between the following brand NEW kits:10-180 Ohm - 220.003 - 10 Ohms empty to 180 Ohms full0-90 Ohm - 220.004 - 0 Ohms empty to 90 Ohms fullFully height adjustable between 150mm / 6" and 595mm / 24" with full instructionsSupplied with Neoprene GasketFull resistance output to suit VDO gauges an...

Choose from the following in the drop down list:Speedflow - 990-M10-1-D - M10 x 1.0 Aluminum Female Weld OnSpeedflow - 990-M12D - M12x1.5 Aluminum Female Weld OnSpeedflow - 990-M14D - M14x1.5 Aluminum Female Weld OnSpeedflow - 990-M16D - M16x1.5 Aluminum Female Weld On

Brand NEW -6AN Speedflow 990-06-D aluminum weld on ORB with Speed flow 814-06-BLK -6 black hex port plug- Fits into an aluminum radiator, oil cooler or fuel tank with a 22mm hole then tig welded- Uses 1/4" allen key to tighten / release.

Choose from the following:Speedflow 997-02-S 1/8" NPT Steel Female Weld OnSpeedflow 997-02-SS 1/8" NPT Stainless Steel Female Weld OnSpeedflow 997-02-D 1/8" NPT Aluminum Female Weld On alloySpeedflow 997-04-D 1/4" NPT Aluminum Female Weld On alloySpeedflow 997-06-D 3/8" NPT Aluminum Female Weld On a...

Ready to weld into your radiator, oil cooler or fuel tank.

Choose from the following:Speedflow 999-03-D - Aluminum -3 Male weld onSpeedflow 999-04-D - Aluminum -4 Male weld onSpeedflow 999-06-D - Aluminum -6 Male weld onSpeedflow 999-08-D - Aluminum -8 Male weld onSpeedflow 999-10-D - Aluminum -10 Male weld onSpeedflow 999-12-D - Aluminum -12 Male weld onSp...

Choose from the following:Speedflow 990-04D - -4 Female ORB Weld OnSpeedflow 990-06D - -6 Female ORB Weld OnSpeedflow 990-08D - -8 Female ORB Weld OnSpeedflow 990-10D - -10 Female ORB Weld OnSpeedflow 990-12D - -12 Female ORB Weld OnSpeedflow 990-16D - -16 Female ORB Weld OnSpeedflow 990-20D - -20 Female ORB Weld OnAN3 AN4 AN6 AN8 AN10 AN12 AN16 AN20-3AN -4AN -6AN -8AN -10AN -12AN -16AN -20AN

Choose from the following on the drop down bar:Speedflow - 997-B02D - 1/8" BSPT Aluminum Weld OnSpeedflow - 997-B04D - 1/4" BSPT Aluminum Weld OnSpeedflow - 997-B06D - 3/8" BSPT Aluminum Weld OnSpeedflow - 997-B08D - 1/2" BSPT Aluminum Weld OnSpeedflow - 997-B12D - 3/4" BSPT Aluminum Weld OnReady to weld into your radiator, oil cooler or fuel tank.

Speedflow - 989-505 - 8mm / 5/16" Aluminum Weld On TailSpeedflow - 989-506 - 10mm / 3/8" Aluminum Weld On TailSpeedflow - 989-508 - 12.7mm / 1/2" Aluminum Weld On Tail

Speedflow - 814-M10-01-BLK - M10 x 1 - Metric Port PlugSpeedflow - 814-M10-02-BLK - M10 x 1.25 - Metric Port PlugSpeedflow - 814-M12-02-BLK - M12 x 1.25 - Metric Port PlugSpeedflow - 814-M12-BLK - M12 x 1.5 - Metric Port PlugSpeedflow - 814-M16-BLK - M16 x 1.5 - Metric Port PlugSpeedflow - 814-M18-BLK - M18 x 1.5 - Metric Port Plug

Speedflow - 989-M18-SS - M18 Female Oxygen Weld On - Stainless Steel

You are bidding on a NEW factory replacement Austin Healey full aluminum fuel tank.Dimensions: 755mm wide x 575mm deep x 150mm high and manufactured from 3mm aluminumPlease note, this tank is 25mm taller than a factory tankHave not tested with the factory straps, may require modifications since this...

Brand NEW Tridon Fan Sender, Perfect for controlling fan(s) on your new aluminum radiator- Spanner: 21mm- Thread: M16 x 1.5- Terminals: 2- Circuit: Normally Open- Operating Temp: 90°C - 85°CCan supply with a female M16 x 1.5 Aluminum weld on to fit this fan sender

1" Version:- 25mm ID of filler neck- 38mm OD of filler neck base (weld portion)1.5" Version:- 36mm ID of filler neck- 49mm OD of filler neck base (weld portion)2" Version:- 46mm ID of filler neck- 66mm OD of filler neck base (weld portion)- Approx 35mm height32mm height with cap threaded onO-ring se...

You are bidding on a brand NEW SMALL aluminum radiator filler neck.- 22mm high or 25mm with cap fitted (NOT SUPPLIED)- 8mm OD x 25mm long hose tail- Small: 48mm base / 5mm thick- Small: 20mm ID- Large: 32mm ID- Large: 56mm base / 5mm thickMachined from 6061 aluminumSuits small Japanese Radiator caps - TRS6J