FPP Speed Shop 458 views Claim this Business♡

Tornado Single�� FansFeatures- Reliable, efficient, high torque motors- Ultra-quiet patented skewed blade design- 650 CFM- Reversible design - can be used as a pusher or puller- Complete fan control kit includes 180�� thermostat with both thread-in water jacket probe and push-in radiator probe, relay wire harness, all mounting hardware, and wire connections

This electric fan uses curved blades to provide more blade area and performance with less noise, plus has a lower profile. It moves 590 CFM at 0 static pressure, drawing only 5.3 amps. Included with each fan is a fan mounting kit with 4 plastic through radiator core rods and clips, 4 foam pads and 4 mounting feet.

When installing your new cooler or electric fans, you'll need the appropriate mounting brackets. These nylon ties and cushion pads make the job much quicker and easier.

- Adjustable fan activation range from 150°F-240°F- Turn-off temperature preset at 10°F below activation settings- Finned, die-cast aluminium housing with bright finish- Interchangeable probe design available in both push-in radiator probe and 3/8" NPT thread-in probe- Includes automatic resettin...

- Adjustable fan activation range from 150°F-240°F- Activates fan #1 at desired temperature- Activates fan #2 at temperature 10°F warmer than Fan #1- Turn-off temperatures preset at 10°F below activation settings- Finned, die-cast aluminium housing with bright finish- Interchangeable probe desig...

This 180°F-on/165°F-off electric fan controller kit is designed to activate up to 2 fans with a maximum draw of 25 amps. Includes a push-in radiator fin probe, relay wire harness and electrical connectors for an easy installation. A/C override circuit included. Features- 180°F preset turn-on temp...

Our adjustable mechanical fan controller features an adjustable turn-on temperature range between 32°F - 240°F with turn-off preset at 10°F below turn-on. Uses capillary tube that installs in radiator inlet tube. Maximum capacity: 16 amps. Features- Adjustable turn-on temperature from 32-240°F- ...

- Allows oil filter to be remote mounted anywhere- Available in single or dual filter configurations- Offered with or without hardware kit- Cast from high quality aluminium- 3 bolt heavy duty mounting plate

Temperature Switch - Electric - 3/8 in NPT Male - Derale Electric Cooling Fan Controllers

High quality die-cast aluminum thermostatic sandwich adapter with 1/2" NPT ports and an O-ring diameter of 3 1/2", this adapter provides external oil lines to allow the addition of an engine oil cooler to most 1963-2007 GM V-8 engines. It installs between the stock engine oil filter landing and the ...

High quality die-cast aluminum thermostatic sandwich adapter with 1/2" NPT ports and an O-ring diameter of 3 1/2", this adapter provides external oil lines to allow the addition of an engine oil cooler to most 1963-2007 GM V-8 engines. It installs between the stock engine oil filter landing and the ...

This sandwich adapter was designed to one give a non-thermostatic option to consumers with high performance engines with 2 3/4" filter landings, and two to fit import vehicles with 2 1/2" diameter filter landings. Made using high quality die-cast aluminum with 1/2" NPT ports, this adapter provides e...

High quality die-cast aluminum spin-on adapter with 1/2" NPT dual side ports, 3/4"-16 threads and fits 2 1/2" to 2 3/4" oil filter landings. This adapter provides external oil lines to allow the addition of an engine oil cooler and/or remote filter mount, installing at the stock engine oil filter lo...

Kit includes a high quality, die cast aluminum 1/2" NPT spin-on adapter designed to fit most passenger vehicles on the road today with 2 1/2" to 3 1/2" oil filter landings. Spin-on adapters provide external oil lines to allow the addition of an engine oil cooler and/or remote filter mount, installin...

At only 1" thick, this high quality aluminum low profile sandwich adapter features 3/8" NPT ports and pressure relief valve and provides external oil lines to run an engine oil cooler while dropping the factory oil filter only 1" lower than stock. Designed to be used on engines with a 3/4"-16 filter...

This universal kit is made from high quality aluminum, sandwich adapter measures only 1" thick and features 3/8" NPT ports, and a pressure relief valve. Providing the ability to add external oil lines for running an engine oil cooler, this adapter lowers the factory oil filter only 1" below the stoc...

This Billet Aluminum LS Engine Adapter features a built in 180°F Thermostat to help reduce engine wear and horse power loss. The oil thermostat allows the oil to bypass the cooler until it reaches 180°F at which point the internal thermostatic valve will close and force 100% of the oil through th...

This high quality die cast aluminum filter mount features a billet look without the expensive billet price tag. The -10AN (7/8"-14) O-ring inlet & outlet ports up design allows for simple relocating of an oil filter. With the 3 hole bracket included this unique mounting system allows mount to be rot...

This high quality die cast aluminum filter mount features a billet look without the expensive billet price tag. The -10AN (7/8"-14) O-ring inlet & outlet side ports design allows for simple relocating of an oil filter. With the 3 hole bracket included this unique mounting system allows mount to be r...

This high quality die cast aluminum filter mount features a billet look without the expensive billet price tag. The -10AN (7/8"-14) O-ring inlet & outlet side ports design allows for simple relocating of an oil filter. With the 3 hole bracket included this unique mounting system allows mount to be r...

This high quality die-cast aluminum spin-on adapter boasts a billet look at a reasonable price. With -10AN (7/8"-14) O-ring ports and 5 filter nipples included this Premium Series adapter fits most passenger vehicles with 2 1/2" to 3 1/2" engine filter landings. It provides external oil lines to all...

3/4"-16 Threaded steel filter nipple, sold individually. FeaturesFilter 3/4"-16 nipple

13/16"-16 Threaded steel filter nipple, sold individually. Features- Filter 13/16"-16 nipple

The Lingenfelter oil cooler adapter is designed to allow the installation of an oil engine oil cooler on GM Gen IV V8 engines including the LS1, LS2, LS3, LS6, LS7. The LPE adapter is machined from a single piece of 6061 aluminum and is then black hard coat anodized for additional durability. The a...