FPP Speed Shop 458 views ♡

Quickcar 611-7006 Extreme Water Temperature GaugeThis QuickCar Extreme Series gauge measures water temperature. Designed for 12-volt or 16-volt power systems, this 2-5/8" gauge has a 100-280°F display range with a 6.5 ft. capillary tube, white face, bright red pointer needle, and LED lighting. Quic...

Quickcar 611-7007 Extreme Volt Meter GaugeThis QuickCar Gauge is a Volt Meter unit from the Extreme Gauge Series and features the QuickCar Logo. Gauge also has a built-in 10 Volt Warning sensor that changes the LED back light from white to Amber when the battery voltage drops to 10 Volts or lower. A...

QuickcarThis QuickCar fitting is an adapter for a mechanical temperature gauge probe. Features a 3/8"-NPT outside thread and is made from high-quality aluminum and now anodized black. Sold each.

Quickcar 61-300 Fuel Pressure IsolatorSpecialized isolator eliminates the hazards associated with driver's compartment mounted fuel pressure gauges. Typically mounted to the engine side firewall, isolator is plumbed with the pressure source on the inlet side and a water & antifreeze 50/50 mix on the...

Quickcar 61-7005 Gauge Panel Assembly - Sprint Panel - Oil PressureWater Temp - Magneto Switch - White Face - 9-Volt Battery - Carbon Fiber Panel - Kit Item Specifics Alternate GAUGE PANEL..

Quickcar 61-714This QuickCar Oil Temperature Warning Light Kit features a Amber Lens and a sending unit that is pre-set to activate at 280°F degrees or higher. All wiring included. Sold as one complete kit.

Quickcar 61-722The best way to mount a pressure sender to a mechanical gauge. QuickCar's light weight Aluminum Tee has 2 1/8"-NPT ports and 1 -4AN port so no extra adapter is needed in plumbing a fluid line to a gauge.

Quickcar 61-727 Sprint Gauge ShockringRubber offset gauge grommet isolates the gauge from engine vibrations, while also providing a tight, lightweight solution to holding the gauge in place. Grommet moves gauge 3/4" towards the driver to give more room behind the gauge. Designed for 2-5/8" gauges, mounting panel will need a 2-3/4" hole for correct tolerances

Quickcar 63-225Temperature Sending Unit, 2 Wire, Electric, 0-320 Degrees, 1/8 in NPT Male, EachAccurately measure oil or water temperatures with the two wire internally grounded temperature sender meant to work with Digital or Redline Stepper gauges. This durable sender features 1/8" NPT thread for ...

- Quickcar 63-604Battery Charger - Quick Car Digital Gauge Battery - Each

- Quickcar 63-605Battery - 12 V - Rechargeable - Replacement - Quick Car Digital Gauge Panels - Each

- Quickcar 64-149This QuickCar Air Cleaner Nut is a Thumb Screw Style. Made from high-quality Aluminum material and features an O-Ring Seal. Each nut fits 5/16"-18 thread studs. Raw Mill Silver finish and sold each.

Cleco Fasteners make quick, easy work of sheet metal alignment and installation. Clecos are available in two sizes: 1/8" and 3/16".Cleco Pliers are required with the use of Cleco Fasteners.

Quickcar 64-230This durable plastic box stores and protects your matched gear sets.

Quickcar 64-708Set includes -6, -8, -10, -12, -16 wrenches for AN fittings. AN fittings are commonplace in todays racing cars for moving fluids from one part of the car to another. Aluminum and multi-color anodize to easily distinguish them apart. Sold as a complete set.

Quickcar 64-709Set includes -6, -8, -10, -12, -16 wrenches for AN fittings. AN fittings are commonplace in todays racing cars for moving fluids from one part of the car to another. Aluminum and multi-color anodize to easily distinguish them apart. This set comes with with double-ended wrenches with both sides positioned at an angle to get into tight and hard to reach places.Sold as a complete set.

QuickCar oil filter cutting tools are a universal model and designed to fit most canister-style oil filters. Cleanly slice the filter can in two pieces to inspect the internals, checking for any harmful metal shavings.

Quickcar 66-100measures the center to center length of a suspension tube with rod ends attached. Capable of measuring 1/2", 5/8", and 3/4" suspension tubes. Sturdy steel construction assures it will not flex and give misleading measurements.

Suspension Tube Ruler Adapter- For 635-66-100- 1/2", 5/8" or 3/4"

Quickcar 66-75414" wide x 2-1/2" tall convex mirror allows for a wide view of behind the car. Black plastic construction to cut weight with aluminum mounting tabs. Roll bar mounting brackets not included.

Quickcar 66-908This QuickCar Roll Bar Clamp Reducer is designed to allow brackets to mount from 1-3/4" round roll bar tubing down to 1-1/2" round roll bar tubing. Made from high-quality aluminum material. Sold each.

Quickcar 66-936Helmet Hook to clamp on 1-1/2" roll bar tubing. Comes anodized gray with stainless bolts.

Quickcar 66-937Perfect for a breather on a transmission or rear end. This securely mounts on a 1-3/4" roll bar. Sold as a kit with breather, bracket, and mounting hardware.

Quickcar 66-940This QuickCar Panel Mounting Bracket is designed to be used with 1-3/4" Roll Bar Tubing. These universal fit brackets fit most all racing types of switch and gauge panels. Made from high-quality aluminum. Sold as one pair. BRACKETS ONLY! Does not include switch panel.