Skeleton Welding 42 views   2 clicks Claim this Business♡

6" Aluminum Go Kart rims fitted with 6x M5 bead lock screws or blank with NO bead lock screws.These are 120mm ish inside the beads (where the tyre seats)I also sell these with single or double bead locks attached, please see my other listings

These are useful to stop your tires spinning on the rim during hard cornering or acceleration and are a bolt in solution for higher power karts, just fit your tire and go.These fit Carlisle branded tires with a thicker wall with some gap/bulging between the outer flange and the inner flange (as per ...

Professionally manufactured tanks from Skeleton Welding designed to be mounted vertically to your rollover bar.Comes with:3/8" BSPT Ball valve3/8" BSPT 6.25 / 1/4" or 8mm / 5/16" brass hose tail90 degree 8mm hose tail for rollover/vent valve.Dimensions: 250mm High x 100mm deep x 100mm wide with a 3/...

Included in this assembly:2x 12mm thick Inner weld rings2x 6mm thick Outer bolt on plates2x Replacement valve stems12x M6x20 Counter sunk boltsYou will need at minimum 1x of these assemblies to do single bead locks or 2x of these for dual bead locksRIMS ARE JUST FOR PHOTO PURPOSES, NONE ARE INCLUDED...