Buzz Audio 11 views Claim this Business♡

This general purpose 3500Hz 50 watt passive crossover is designed for smaller hi-fi home stereo DIY speaker builds. It is a good choice for speakers with lower power woofers and small tweeters. Termination requires soldering your wires to the circuit board.- Suitable for 8 ohm drivers- 3.5kHz 12dB/o...

A well designed two way passive crossover for hi-fi woofer and tweeter loudspeaker projects with 12dB and 18dB per octave filters at 2kHz. The crossover features heavy duty chokes, quality film capacitors and excellent build quality. The high frequency output can be set to 2 levels of attenuation to...

A well designed two way passive crossover for hi-fi woofer and tweeter loudspeaker projects with 12dB per octave filters at 2.5kHz. The crossover features heavy duty air core chokes, quality capacitors and excellent build quality. The high frequency output can be set to 3 levels of attenuation to ma...

These cost effective gold plated tip-sleeve (or mono) 6.35mm jack plugs are ideal for DYI guitar and instrument leads. These robust 1/4 inch jack plugs will accept cable up to 6.5mm diameter.- Solder termination- Solid all metal body- Gold plated contacts- Crimp style cable clamp

This adaptor plate fits onto most bolt on compression drivers with a 1" (25.4mm) diameter exit and provides a standard 35mm thread to fit onto threaded horn flares. The adaptor is made from aluminium with a strong 3mm base plate so it can support heavy horn drivers. The universal mounting slots will...

A 8 unit (267mm) high 19" deep rack mount road case offering very good quality construction at a reasonable price. This 43cm deep crush resistant rack flight case is made from an extremely tough Polypropylene Copolymer material and is virtually indestructible. The case lid features a sealed ring, wh...

A 15 inch low mid frequency drive unit at a excellent price! This speaker features a vented pole piece and a large magnet structure. The tone of this 15" speaker is good for vocal reproduction as a replacement in foldback speakers, PA mid range and for new builds. - 8 ohms- 200W RMS rated 3.0" voice...

The Kick is a 500 series module version of our DBC-20 diode bridge compressor and sports the same vintage style compression with rich harmonic vibe.For more information visit the Kick product page >

A general purpose professional bass 15 inch 8 ohm woofer loud speaker from SB Audience with a very smooth midrange and extended low frequency response. Perfect for new builds or as a high power 500W replacement driver in bass guitar cabinets, sound system FOH, subwoofers and foldback speakers. Top q...

High power professional 12 inch coaxial full range loudspeaker component from SB Audience. The 12CX350 features a LF 12" woofer integrated with a 1" HF compression driver using a dual ferrite/neodynium magnet structure. The HF horn is physically central to the woofer core and so overall a very coher...

You can use these coloured rings on the premium range of male and female Neutrik -XX XLR connectors as well as the lower cost Buzz Audio Neutrik style XLR range. The ID rings can be fitted without unsoldering the insert by simply disassembling the connector.

A 12 inch (305mm) high quality woofer drive unit at a excellent price! This speaker features a vented pole piece and a polypropylene cone with rubber surround. The woofer is suitable as a replacement driver in older hi-fi speaker brands such as Pioneer, Sansui, Kenwood and for sub woofer cabinets or...

Special right angle XLR leads using heavy duty Rean and Buzz Audio 3 pin XLR connectors with Sommer Club flexible cable to offer excellent performance for studio and stage use. These cables are best for applications where the leads are being coiled on a regular basis or moved around in the studio. H...

These right angle XLR leads use heavy duty Rean 3 pin XLR plugs and sockets with Sommer Club flexible cable and offer excellent performance for studio and stage use. These cables are best for applications where the leads are being coiled on a regular basis or moved around in your studio. Hand made b...

These right angle XLR leads use heavy duty Rean 3 pin XLR plugs and sockets with Canare 2E5AT balanced install cable and offer excellent performance for studio use. These cables are best for applications where the leads are not being coiled on a regular basis such as studio and permanent installatio...

Special right angle XLR leads using heavy duty Rean and Buzz Audio 3 pin XLR connectors with Canare 2E5AT balanced install cable to offer excellent performance for studio use. These cables are best for applications where the leads are not being coiled on a regular basis such as studio and permanent...

A 4 pole D Series size panel mount speaker connector in the Speakon twist and lock style from Rean/Neutrik These high quality connectors will fit our D Series patch panels and cabinet dish connector plates.- Used for 2 pole and 4 pole Speakon connections- Silver plated contacts- Solder or 4.8mm push...

A very high quality round speaker cable for pro audio and home stereo use with four 2.5mm sq OFC cores. Made by Van Damme, this speaker wire is very flexible and is suitable for stage, studio and home theatre applications. Sold by the metre or we can custom assemble loudspeaker leads to fit your req...

A right angle male XLR cord connector with 3 pins for audio applications from Rean. These metal XLR plugs are very robust and have a chuck style cable clamp. The plug barrel can be rotated at 90 degree intervals inside the body of the connector, so the connector can be assembled with the cable entry...

A right angle female XLR cord connector with 3 pins for audio applications from Rean. These metal XLR sockets are very robust and have a chuck style cable clamp. The socket barrel can be rotated at 90 degree intervals inside the body of the connector, so the connector can be assembled with the cable...

Van DammeThese patch leads using our compact right angle XLR connectors are handy where space is tight and the length of a standard XLR connector is a problem inside racks and flight cases. Best suited for semi-permanent installations where you are not plugging and unplugging the cables on a regular...

This high quality 15W 6.5" full range loudspeaker is a perfect replacement for small worn out radio and guitar speakers. It features a "wizzer" horn cone for extended treble response and a thick paper cone with impregnated surround for long life. A general purpose 165mm 6.5" driver for full range sp...

These neodymium magnet 3/4" soft dome tweeter have a very articulate sound and are a good choice for book shelf speaker projects or to replace blown tweeters in your home stereo hi-fi set up. A heatsink on the back of the magnet helps with heat dissipation for excellent reliability. The tweeters are...

A heavy duty female to female Speakon coupler to join together and extend two speaker cables. It is compatible with 2 pole and 4 pole Speakon connectors.